Extended 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km on 62.5/125 µm MMF and 50/125 µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.

Dual Speed 100Base-FX or 1000Base-X Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10km at Gigabit speed and 100Mbit speed.Note: - at 100Mbit speed, this SFP can interoperate with SFP-100-LC-SM15 or similar transceiver,- at Gigabit speed, this SFP can interoperate with SFP-GIG-LX or similar transceiver.

Dual Speed 100Base-FX or 1000Base-X Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 550m at Gigabit speed and 2km at 100Mbit speed. Note: - at 100Mbit speed, this SFP can interoperate with SFP-100-LC-MM or similar transceiver on the other end,- at Gigabit speed, this SFP cannot interoperate with SFP-GIG-SX or similar transceiver on the other end running over 850nm wavelength.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ yellow latch. Supports single mode fiber over 1550 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ violet latch. Supports single mode fiber over 1490 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ red latch. Supports single mode fiber over 1610 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ red latch. Supports single mode fiber over 1590 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ orange latch. Supports single mode fiber over 1570 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ green latch. Supports single mode fiber over 1530 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ gray latch. Supports single mode fiber over 1470 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ blue latch. Supports single mode fiber over 1510 nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

100Base-FX SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic cable.

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.

100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic cable.

100Base-BX SFP transceiver with an SC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits 1310nm and receives 1550nm optical signal

100Base-BX SFP transceiver with an SC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits 1550nm and receives 1310nm optical signal

100Base-BX SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits 1310nm and receives 1550nm optical signal