1-port GE or 8-port 10/100 FE Line Module: supports (1) Gigabit Ethernet interface or (8) 10/100 Fast Ethernet interfaces with 256MB of memory. Requires either the GE IOA (ERX-GIGESFP-IOA) with pluggable SFP adapters or the FE IOA (FE-8_I/O). Line module redundancy is not supported.

1-Port Gigabit Ethernet IQ PIC (Uses SFP Optics Module - See Interface Accessories section)

1-Port Gigabit Ethernet IQ PIC (Uses SFP Optics Module - See Interface Accessories section)

1-Port Gigabit Ethernet PIC (Requires a pluggable SFP Optics Module such as SFP-1GE-SX, SFP-1GE-LX, SFP-1GE-LH, or SFP-1GE-T - See Interface Accessories section) JUNOS 6.4 - available for PE-1GE-SFP, P-1GE-SFP, PB-1GE-SFP, PB-2GE-SFP and PB-4GE-SFP only. JUNOS 7.1 - available for all SFP-compatible PICs.

1-Port Gigabit Ethernet PIC (Requires pluggable SFP Optics Module: SFP-1GE-SX, SFP-1GE-LX, SFP-1GE-LH, or SFP-1GE-T - See Interface Accessories section) Shipping with JUNOS 6.3. Will replace PE-1GE-SX-B, PE-1GE-LX-B, and PE-1GE-LH.

1-port Non-Channelized OC12 / Non-Channelized STM4 Enhanced IQ PIC, (Requires a pluggable SFP Optics Module - See Interface Accessories section) Requires JUNOS 9.3R1 or higher

1-port OC-12,STM4 ATM2 IQ PIC, Multi mode (With diff. Serv)

1-port OC-12,STM4 ATM2 IQ PIC, Multi mode (With diff. Serv)

1-port OC-12,STM4 ATM2 IQ PIC, Single mode, IR (With diff. Serv)

1-port OC-12,STM4 ATM2 IQ PIC, Single mode, IR (With diff. Serv)

1-port OC12/STM4 LH IOA: provides (1) single mode OC12/STM4 SC full duplex physical port supporting distances up to 40 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.

1-port OC12/STM4 MM IOA with APS: provides (1 = 1 active + 1 standby) OC12/STM4 multimode SC full duplex physical ports. Supports distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules. Requires JUNOSe 4.0 software or later.

1-port OC12/STM4 MM IOA: provides (1) multimode OC12/STM4 SC full duplex physical port supporting distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.

1-port OC12/STM4 or OC3/STM1, rate-selectable PIC. Requires OC12 or OC3 SFP pluggable optics. See Interface Accessories section. Requires JUNOS 8.4R1. Will replace PB-1OC12-SON-MM and PB-1OC12-SON-MM

1-port OC12/STM4 or OC3/STM1, rate-selectable PIC. Requires OC12 or OC3 SFP pluggable optics. See Interface Accessories section. Requires JUNOS 8.4R1. Will replace PE-1OC12-SON-MM and PE-1OC12-SON-SMIR

1-port OC12/STM4 SM IOA with APS: provides (1 = 1 active + 1 standby) OC12/STM4 single mode SC full duplex physical ports. Supports distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules. Requires JUNOSe 4.0 software or later.

1-port OC12/STM4 SM IOA: provides (1) single mode OC12/STM4 SC full duplex physical port supporting distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.

1-port OC48 PIC with pluggable OC-48 SFP optics (Requires pluggable OC-48 SFP Optics Modules: SFP-1OC48-SR, SFP-1OC48-IR, and SFP-1OC48-LR - See Interface Accessories section) Requires JUNOS 6.4 or above

1-port OC48/STM16 POS Line Module: supports (1) OC48/STM16 POS interface. This double-wide line module is only available for the ERX-1440 and requires (2) slots within the chassis with a maximum of (2) OC48/STM16 line modules per chassis. Requires (1) ERX-OC48ST16-IOAs. Line module redundancy is not supported. Requires JUNOSe 4.1.3 or higher 4.1.x releases, 5.0.3 or higher 5.0.x releases, 5.1.1 or higher 5.1.

1-port OC48/STM16 rate selectable PIC. Port speed is configurable to OC12 or OC3. Requires OC48, or OC12, or OC3 SFP pluggable optics. See Interface Accessories section. Requires JUNOS 8.3R1. Will replace PB-1OC48-SON-SFP