Sort by: name (ascending | descending), price (ascending | descending), customer rating (ascending | descending)

1   2   3   4   5   6    ...   12   next >>

Accessory Kit for Spare FSP/MSP Chassis Only 109567560 STGR-SP-ACCKIT Available to order

Accessory Kit for Spare LS/LSP/RT Chassis Only Needs to be ordered with each spare chassis not including a Control Module. ONLY ORDERABLE in combination with an EMPTY Chassis. 109567578 STGRLR-SP-ACCKIT Available to order

Stinger LS+ Model Base Unit Includes chassis, backplane, dual -48VDC line filters, alarm module, cooling system, 19"" rack mount brackets and capacity for up to 9 LIPMs or 8 LIPMs and one LIM and LPM. Supports modules with up to 72 ports. Also includes bl 109570663 STGRLSP-UNIT-MODEL Available to order

64MB PCMCIA flash memory card 109573667 STGR-SP-FLASH-64 Available to order

64MB PCMCIA flash memory card 109573675 STGRRT-SP-FLASH-64 Available to order

IP2100 Control Module with 2 SFP slots for GE interfaces - Environment hardened version Stinger Control Module with ATM switch fabric plus high speed IP routing and multicast functionality. Supports RFC 1483 termination and RIPv1/v2/OSPF routing plus 2 mo 109577171 STGRRT-CM-IP2100-F-MODEL Available to order

24 port VDSL LIM 24 VDSL ports with DMT line coding. Ikanos based LIM. Packet over DSL on DSL line. Requires an IP2000 or IP2100 as Control Module. Future VDSL2 FW upgarde possible. SW feture to supporta slo ADSL DMT mode with future releases. Pre-Requisi 109581108 STGR-LIM-VD-24 Available to order

72-Port ADSL2+ Annex B LIPM (Line Interface and Protection Module) - High Bandwidth Network Processor based High Bandwidth Line Interface Module for ATM over ADSL-DMT. Supports ADSL full-rate, ADSL2+ operation, and line sharing with ISDN equipment. Includ 109593079 STGR-LIPM-A2B-72-HB Available to order

2-Port TM with OC-3c/STM-1 interface (single mode, intermediate reach) Trunk Module for operation at 155 Mbps per port over single-mode fiber, at distances up to 20 km. 1310 nm Optical Transmit Power: -15 dBm min, -8 dBm max. Optical Receive Sensitivity: 300135076 STGR-TM-OC3-2 Available to order

2-Port TM with DS-3 interface (coax) Trunk Module for operation at 44.736 Mbps per port. 300135084 STGR-TM-DS3-2 Available to order

Cable Management Kit Cable guides to keep line and trunk cabling neatly secured at rear of Stinger unit. 300135118 STGR-CABMGT Available to order

NavisAccess software Right-To-Use (RTU) license One license required per Stinger FS. If NavisAccess management is not required for Stinger, do not include this item. Note: Does not include any NavisAccess server software components (ANC-xx-SOL, ANC-xx-SOL 300135126 STGR-SO-ANC Available to order

Stinger Alarm Relay 300135142 STGR-SP-AR Available to order

Stinger DC Filter Tray 300135159 STGR-SP-DCTRAY Available to order

Stinger 19” Rack Mount Kit 300135183 STGR-SP-RM19 Available to order

Stinger 23” Rack Mount Kit 300135191 STGR-RM23 Available to order

48-Port LPM Line Protection Module with two 50-pin (RJ-21) telco connectors. Each connector supports 24 ports (2 wires per port). Provides electrical isolation and surge protection. 300268141 STGR-LPM-48 Available to order

48-Port LPM (with port redundancy) Line Protection Module with two 50-pin (RJ-21) telco connectors. Each connector supports 24 ports (2 wires per port). Provides electrical isolation and surge protection. On-board relays enable 2 modes of operation, on a 300268174 STGR-LPM-48-RP Available to order

1-Port TM with OC-3c/STM-1 interface (single mode, intermediate reach) Trunk Module for operation at 155 Mbps over single-mode fiber, at distances up to 20 km. 1310 nm Optical Transmit Power: -15 dBm min, -8 dBm max. Optical Receive Sensitivity: -31 dBm m 300268281 STGR-TM-OC3-1 Available to order

1-Port TM with DS-3 interface (coax) Trunk Module for operation at 44.736 Mbps. 300268299 STGR-TM-DS3-1 Available to order

1   2   3   4   5   6    ...   12   next >>