STM1-2M IR W/CPU-2 The STM1-2M IR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach (IR) single mode fiber optical interface has a total loss budget of 12 db. The STM1-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.

STM1-2M LR W/CPU-2 The STM1-2M LR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical interface has a total loss budget of 28 db. The STM1-2M LR is single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which when installed, provides enhanced traffic management features. This card variant is shipped with R4.3 S/W.

STM1-2M LR W/CPU-2 The STM1-2M LR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical interface has a total loss budget of 28 db. The STM1-2M LR is single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which when installed, provides enhanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 7670 ESE. On the ESE shelf only the eTM is supported for traffic shaping.

STM1-2M LR W/CPU-2 The STM1-2M LR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical interface has a total loss budget of 28 db. The STM1-2M LR is single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which when installed, provides enhanced traffic management features. This card is also supported on R2.0 7670 ESE. On the ESE shelf only the eTM is supported for traffic shaping.

STM1-2M MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.

STM1-2M XLR W/CPU-2 The STM1-2 XLR UNI/NNI Card with CPU-2 is a both UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The transmit and receive wavelength of the XLR card is 1550 nm and supports up to 110 Km of fiber. The STM1-2 32K XLR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). Requires a minimum of Release 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) which, when installed, provides enhanced traffic management features. This card variant is shipped R4.2 S/W.

STM4-2 IR R4.3 The STM4-2 ATM IR Card is a UNI/NNI STM4 ATM interface card operating at the SONET STM4 rate of 622 Mbps, with 32k egress cell buffering management capability. The Intermediate Reach (IR) single mode fiber optical interface has a total loss budget of 12 db. The STM4-2 employs the CPU-2 module for enhanced call performance. The STM4-2 requires release 4.2 for operational support.

STM4-2 LR R4.3 Identical to 90-6200-21 except the Long Reach (LR) single mode fiber optical interface has a total loss budget of 24 db.

STM4-2 XLR 1550 R4.3 Identical to 90-6200-21 except the eXtra Long Reach(XLR) single mode fiber optical interface has a center wavelength of 1550nm.

STRATUM 3 SSU 2/R3.1 clei The Stratum 3 SSU-2 Module provides Stratum 3 timing synchroniz ation to an incoming timing signal for the 7470 system. The Stra tum 3 SSU-2 Module is an optional module for the Control Card 2 (90-3346-01) INTEG CALLP/PNNI CARD-2 R3.1 (90-6226-X1) and INTEG CALLP CARD-2/R3.1 (90-6226-X2). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

STRATUM 3 SSU MODULE clei The Stratum 3 SSU Module provides a BITS input clock to the 727 0 system. The Stratum 3 SSU is an optional module for the Contro l Card (90-4452-0x). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

SUBRATE INTERFACE MOD The Subrate Interface (SRI) Module is added to the Frame Relay Switch Card (90-1459-0X-XX) to enable the support of subrate speeds which are not multiples of 8K. The module also supports X.50 BIS @ 48kbps, X.50 DIV 2,3, <(>&<)> 5, HCM and DDS.

SUBRATE MPX MODULE

Super-Rate Adapter Module ( SAM )

SWITCH HSPS-2 CBL 10FT This cable is required to interconnect the 90-0662-01/03 Switching Shelf interface cards to the 90-0652-02 High Speed Peripheral Shelf-2 interface cards. (Previously called DIN to DB37M 10FT)

SWITCH HSPS-2 CBL 18FT Identical to 90-1583-01 but 18 ft in length. (Previously called DIN to DB37M 18FT).

SWITCH HSPS-2 CBL 25FT Identical to 90-1583-01 but 25ft in length. (Previously called DIN to DB37M 25FT).

SWITCH HSPS2 CBL50FTEMC This cable assembly has two applications. 1. This cable assembly is required to link the 3600 EMC Switching Shelves (90-0662-04/05) equipped with EMC PMX Switching Card (90-0640-04) to EMC Peripheral Shelves (90-0010-13/14) equipped with EMC PMX Switching Interface Cards (90-0639-05), rear panel connection. 2. This cable assembly is required to link the 3600 Switching Shelves (90-0662-04/05) equipped with EMC PMX Switching Card (90-0640-04) to High Speed Peripheral Shelf-2 (90-0652-02) equipped with E-3/Dual E-3 Interface Card (90-1224-01,90-1224-02), rear panel connection. MD Effectivity Date=March-01-2000 as per PDN#1288A.

SWITCH I/F CARD PMX clei This card is required in each 3600 Peripheral Shelf pair (1 or 2 depending on Peripheral redundancy). For upgrade of a 3600 to a 3600 Peripheral Shelf, each 3600 Expander card is replaced by a Switching Interface Card. This assembly is similar to 90-0639-01 but allows for rear panel connectivity. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

SWITCH I/F CBL 10FT This cable assembly is required to link the 3600 Switching Shelves (90-0662-01/03) to the 3600 Peripheral Shelves. For each Switching Shelf, one cable assembly is required for each Switching Interface card in the system.