Наш телефон: 8 921 751-66-99
       
English  Русский 
Catalog
Currency:

Sort by: name (ascending | descending), price (ascending | descending), customer rating (ascending | descending)

1   2   3   4   5   6   7   next >>

7470 Documentation CD This CD contains the 7470 MSP Technical Practices Library for the current release and the two previous releases. The CD contents are determined by the product release status at the date of purchase; for example; in Q2 2008, the current release is 7470 MSP R9.1.2 and the two previous releases are R8.0 and R7.0.
Available to order
OC3-2M SFP W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The OC3-2M SFP UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The OC3-2M SFP is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical physical interface and requires one of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP) or 90-9764-03 (OC3/STM1 LR SFP). Note that the full set of SFP functions are only available in 7470 MSP R9.1 or 7670 ESE R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01 (SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE) or 90-9771-03 (MULTIMODE LC TO SC CONVERSION CABLE). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module(eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label
Available to order
QUAD OC3/STM1 SFP UNI/NNI CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The quad OC3/STM1 UNI/NNI Card is a ATM interface card operating at the SONET/SDH OC3/STM1 rate of 155 Mbps per port. This card is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical or electrical physical interface and requires one or more of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP), 90-9764-03 (OC3/STM1 LR SFP) or 90-9764-04 (STM1 ELEC SFP). Note that the full set of SFP functions are only available in 7470 MSP R8.0-R9.1 or 7670 ESE R4.0-R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01 (SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE), 90-9771-03 (MULTIMODE LC TO SC CONVERSION CABLE), 90-9772-01 (BNC CONVERSION CABLE FOR ELEC SFP) or 90-9772-02 (SMZ CONVERSION CABLE FOR ELEC SFP).
Available to order
SPARE PS-2 AIR FILTER - PKG OF 10 Replacement air filters for the Peripheral Shelf 2 (90-4907-01); Package of 10. Dimensions: AIR FILTER 16.92 X 9.34 X .3
Available to order
STM1-2M SFP W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The STM1-2M SFP UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The STM1-2M SFP is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical or electrical physical interface and requires one of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP), 90-9764-03 (OC3/STM1 LR SFP) or 90-9764-04 (STM1 ELEC SFP). Note that the full set of SFP functions are only available in 7470 MSP R9.1 or 7670 ESE R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01(SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE), 90-9771-03(MULTIMODE LC TO SC CONVERSION CABLE), 90-9772-01 (BNC CONVERSION CABLE FOR ELEC SFP) or 90-9772-02 (SMZ CONVERSION CABLE FOR ELEC SFP). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label
Available to order
1.6G DUAL HUB-2 clei The 7470 1.6G Dual Hub Card 2 is common equipment card for the Peripheral Shelf Cardfile. The Dual Hub card handles two bi-directional 800M ISL links: ISL Port#1 supports UCS 1-6 and ISL Port#2 supports UCS 7-12. Two Dual Hub Cards are required perperipheral shelf (for fabric redundancy) in multi-shelf systems.
Available to order
16 PORT E1 FR CARD - 120 OHM This card provides sixteen Frame Relay Interface ports that are E1 compatible. Each port may be configured for channelized, unchannelized or unframed operation. It can be used with distribution panels 90-6398-01, 90-2543-01, or 90-8307-01.
Available to order
16 PORT T1 FR -100 OHM clei This card provides sixteen Frame Relay Interface ports that are DS1 compatible. Each port may be configured for channelized, unchannelized, or unframed operaton. It can be used with distribution panels 90-2543-01, or 90-8307-01.
Available to order
16-PORT T1/E1 MS CARD CLEI The 16 port T1/E1 Multi-Service Card provides circuit emulation service and performs the necessary operations to allow the transport of channels through an ATM network as follows. When configured for T1 operation: individual 64k (DS0) time slots, n x64kbps (DS0) groups of time slots, and/or DS1 circuits. When configured for E1 operation: individual 64k time slots (E0), n x 64kbps (E0) groups of time slots, and/or E1 circuits. This card supports both structured and unstructured service as defined by the ATM Forum. This card provides connectors for an optional CR/IMA module (90-8978-02). The optional module position cannot be used if the 16 port T1/E1 Multi-Service Card is installed in a Type-1 7470 peripheral shelf. The more common Type-2 shelf (90-4907-01) must be used if the optional CR/IMA module is required. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label. Note that this card may only be used in 7470 MSP R9.1 and above systems.
Available to order
220/240V TO 48 VDC RECTIFIER Modular rectifier chassis containing one 1680W, 220/240 VAC nominal to 48 VDC rectifier with mounting hardware, power cord and termination hardware for two rectifiers, as the chassis can accommodate two rectifiers for a redundant configuration. A second rectifier is available by ordering an upgrade kit (90-2844-02). The rectifier rack is 3 rack units tall (5.25 ) and fits a standard 19 rack.
Available to order
220/240V TO 48 VDC UPG KIT A single 1680W 220/240 VAC nominal to 48 VDC rectifier with power cord. This rectifier plugs into the 7470 220/240 VAC to 48 VDC Rectifier chassis (90-2844-01).
Available to order
3-PORT DS3 FRAME PROCESSING CARD CLEI The triple port 3/1/0 Frame Processing Card provides a standards-compliant DS3 interface to the 7470 MSP and 7670 RSP ESE systems. The DS3 FP Card supports Frame Relay services. The Frame Processor card can support up to 512 streams. Each stream is made up of one DS3, one T1, or nxDS0 (1 to 24 for T1). This interface will perform standards-based frame switching network-interworking or service-interworking. Requires adapter card 90-7307-01 for use in the 7670 ESE. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-02 for deployment in 7670 ESE shelf. The 90-2322-01 and 90-7308-02 MAUs are not shipped with the DS3 FP card and each must be ordered separately. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Available to order
7470 MAU -16 PORT T1/E1 WIRE WRAP The T1/E1 Wire Wrap MAU provides a wire wrap connector (66 posts) for the 7470 16 port T1/E1 cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78). As of August 1 2007 the WW MAU can not be sold in countries which require compliance to EN55022:1998 or CISPR22:1997 as these specifications include requirements for conducted emissions on telecommunication ports. The recommended replacement parts are either the AMP Champ MAU: 90-2542-01 MAU, T1/E1 AMP/CHAMP, or the 90-2542-04 7470 MAU -16 PORT T1/E1 AMP/CHAMP .
Available to order
7470 MAU -16 PORT T1/E1I AMP/CHAMP The T1/E1 AMP/CHAMP MAU provides a 64 pin connector for the 7470 16 port T1/E1 cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78).
Available to order
7470 OC12-2 IR clei The OC12-2 ATM IR Card is a UNI/NNI OC12 ATM interface card operating at the SONET OC12 rate of 622 Mbps, with 32k egress cell buffering per card and advanced traffic management capability. The Intermediate Reach(IR) single mode fiber optional interface has a total loss budget of 12 db. The OC12-2 employs the CPU-2 module for enhanced call performance.
Available to order
7470 OC12-2 LR clei Identical to the 90-6197-31 except the Long Reach (LR) single mode fiber optical interface has a total loss budget of 24 db.
Available to order
7470 OC12-2 SR Identical to the 90-6197-31 except the Short Reach (SR) card utilizes a multi mode fiber optical interface. The SR card has a total loss budget of 6 db.
Available to order
7470 OC12-2 XLR 1550 Identical to 90-6197-31 except the Extra Long Reach (XLR) single mode fiber optical interface has a center wavelength of 1550 nm.
Available to order
7470 S/W UPGRADE TO R8.0 NO CD Purchase of this Right to Use (RTU) licence allows customers currently running a previous 7470 MSP release to upgrade to 7470 MSP R8.0, according to the upgrade requirements specified for 7470 MSP R8.0. An additional 90-6018-80/81 upgrade Right-to-use must be purchased for each Control card or Integrated Control card to be upgraded. Note that no software CD is shipped with this part.
Available to order
7470 S/W UPGRADE TO R8.0 WITH CD Purchase of this Right to Use (RTU) licence allows customers currently running a previous 7470 MSP release to upgrade to 7470 MSP R8.0, according to the upgrade requirements specified for 7470 MSP R8.0. An additional 90-6018-80/81 upgrade Right-to-use must be purchased for each Control card or Integrated Control card to be upgraded. This part includes a software CD containing the 7470 MSP R8.0 software
Available to order

1   2   3   4   5   6   7   next >>

(empty)
 
Blog / News
Survey