4-port Fast Ethernet PIC, TX interface, RJ45 connector

4-port Fast Ethernet PIC, TX interface, RJ45 connector. with PIC ejector

4-Port Gigabit Ethernet PIC (Requires pluggable SFP Optics Modules: SFP-1GE-SX, SFP-1GE-LX, SFP-1GE-LH, or SFP-1GE-T - See Interface Accessories section) Shipping with JUNOS 7.0. Will replace PB-4GE-SX.

4-port Non-Channelized DS3 / Non-Channelized E3 Enhanced IQ PIC, 75 ohm BNC Requires JUNOS 9.3R2 or higher

4-port Non-Channelized OC3 / Non-Channelized STM1 Enhanced IQ PIC, (Requires a pluggable SFP Optics Module - See Interface Accessories section) Requires JUNOS 9.3R2 or higher

4-port OC3/STM1 LH IOA: provides (4) single mode OC3/STM1 SC full duplex physical ports supporting distances up to 40 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.

4-port OC3/STM1 MM IOA with APS: provides (4 - 4 active + 4 standby) OC3/STM1 multimode LC full duplex physical ports. Supports distances up to 2 kilometers. Works with the ERX-OCXA256M-MOD, OC3/OC12-ATM, and OC3/OC12-POS line modules. Requires JUNOSe 5.1.2 software or later.

4-port OC3/STM1 MM IOA: provides (4) multimode OC3/STM1 SC full duplex physical ports supporting distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.

4-port OC3/STM1 or 1-port OC12/STM4 or 4-port T3/DS3 ATM Line Module: supports (4) OC3/STM1 ATM or (1) OC12/STM4 ATM or (4) T3/DS3 ATM interface(s) with 256MB of memory. Requires an OC3/STM1, OC12/STM4, or T3/DS3 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1

4-port OC3/STM1 or 1-port OC12/STM4 or 4-port T3/DS3 ATM Line Module: supports (4) OC3/STM1 ATM or (1) OC12/STM4 ATM or (4) T3/DS3 ATM interface(s) with 256MB of memory. Requires an OC3/STM1, OC12/STM4, or T3/DS3 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 This line module has the following minimum software requirements: 3.2.3p27-0, 3.3.2p8-1, 3.4.1p8-2, 4.0.3, 4.1.1, 5.0.0 (Edinburgh) or later. This replaces EOL OC3/OC12-ATM

4-port OC3/STM1 or 1-port OC12/STM4 POS Line Module: supports (4) OC3/STM1 POS or (1) OC12/STM4 POS interface(s) with 128MB of memory. Requires either an OC3/STM1 IOA or OC12/STM4 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 line module redundancy.

4-port OC3/STM1 or 1-port OC12/STM4 POS Line Module: supports (4) OC3/STM1 POS or (1) OC12/STM4 POS interface(s) with 128MB of memory. Requires either an OC3/STM1 IOA or OC12/STM4 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 line module redundancy.

4-port OC3/STM1 SM IOA with APS: provides (4 = 4 active + 4 standby) OC3/STM1 single mode LC full duplex physical ports. Supports distances up to 15 kilometers. Works with the ERX-OCXA256M-MOD, OC3/OC12-ATM, and OC3/OC12-POS line modules. Requires JUNOSe 5.1.2 software or later.

4-port OC3/STM1 SM IOA: provides (4) single mode OC3/STM1 SC full duplex physical ports supporting distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.

4-port SONET,SDH OC48,STM16 PIC (Requires an OC48 SFP Optics Module, such as SFP-1OC48-SR, SFP-1OC48-IR, or SFP-1OC48-LR - See Interface Accessories section) Shipping with JUNOS 6.2. Will replace PC-4OC48-SON-SMSR.

4-port T1 PIC, (120-ohm, RJ48 connectors)

4-port T1 PIC, (120-ohm, RJ48 connectors) with PIC ejector

4-Port Type 1 Gigabit Ethernet Enhanced IQ2 PIC Uses SFP Optics Modules - See Interface Accessories section

4-Port Type 1 Gigabit Ethernet Enhanced IQ2 PIC Uses SFP Optics Modules - See Interface Accessories section

4-Port Type1 Gigabit Ethernet IQ2 PIC (Uses SFP Optics Modules - See Interface Accessories section)