ATM LATM 140-S INT. REACH

BCR NI-2 ISDN 100 PORTS This software package supports the Bellcore TR-NWT-001268 ISDN signaling protocol, allowing N-ISDN to ATM signaling interworking. The signaling protocol interworking combined with Address Translation/Tunnelling provide PBX interconnect and VPN support.

BCR NI-2 ISDN 200 PORTS This software package supports the ETS 300 102-1 ISDN signaling protocol, allowing N-ISDN to ATM signaling interworking. The signaling protocol interworking combined with Address Translation/Tunnelling provide PBX interconnect and VPN support.

BCR NI-2 ISDN 201+ PORT This software package supports the ETS 300 102-1 ISDN signaling protocol, allowing N-ISDN to ATM signaling interworking. The signaling protocol interworking combined with Address Translation/Tunnelling provide PBX interconnect and VPN support.

BT-2 CARD/CABLE KIT Included in this kit are one Upper Balanced Transceiver-2 Card, one Lower Balanced Transceiver-2 Card and one intershelf cable. To be used with the BT-2 Carrier Assy (90-0090-07) and the 90-0010-13/14/15 EMC/23 inch Single Shelves. One kit provides non-redundant dual shelf capability while two kits provide redundant capability.

BT-2 CARD/CABLE KIT Included in this kit are one Upper Balanced Transceiver-2 Card, one Lower Balanced Transceiver-2 Card and one intershelf cable. To be used with the BT-2 Carrier Assy (90-0090-07) and the 90-0010-13/14/15 EMC/23 inch Single Shelves. One kit provides non-redundant dual shelf capability while two kits provide redundant capability.

BT-2 CARRIER ASSEMBLY Included in this kit are two BT-2 Carrier cards and two half-height filler plates (one Upper and one Lower). Required for the installation of either one (for non-redundant, dual shelf) or two (for redundant, dual shelf) BT-2 Card/Cable Kit (90-0090-06) in 90-0010-13/14/15 EMC/23 inch Single Shelves.

BT-2 CARRIER ASSEMBLY Included in this kit are two BT-2 Carrier cards and two half-height filler plates (one Upper and one Lower). Required for the installation of either one (for non-redundant, dual shelf) or two (for redundant, dual shelf) BT-2 Card/Cable Kit (90-0090-06) in 90-0010-13/14/15 EMC/23 inch Single Shelves.

CABLE / V.35 ADAPTER PNL.

CABLE EMC/23IN SW HSPS-2 25 FT

CALL PROCESS CARD The CPC is a UCS card intended to provide support for all D channels (BRI or PRI) terminated within a dual shelf 3600/64. It combines with various physical interface cards to provide an ISDN-compatible interface. It supports basic rate interfaces using the S/T BRI Card and primary rate interfaces using the DT1-2, Dual T-1 Card and the DE1-2 Dual E-1 Card.

CALL PROCESSOR CARD The CPC is a UCS card intended to provide support for all D channels (BRI or PRI) terminated within a dual shelf 3600/64. It combines with various physical interface cards to provide an ISDN-compatible interface. It supports basic rate interfaces using the S/T BRI Card and primary rate interfaces using the DT1-2, Dual T-1 Card and the DE1-2 Dual E-1 Card.

CALLP CARD-2 R4.3 This is a UCS card that provides switched services, call processing, and routing. This card, an Integrated CallP/PNNI Card-2 is required for systems that support SVC and/or S-PVC calls. This card is delivered with R4.3 software.

CE - I/F CARD PRI APS The I/F PRI APS Card in combination with CONTROL CARD PRI APS (90-6346-01) and the E1/T1 PRI APS SHELF (90-6344-01) provides N:1 Automatic Protection Switching support for T1/E1 CE Cards on the 36170. Each T1/E1 Card on the 36170 that is to be protected must be connected to an Interface APS Card in the APS Shelf. The Interface APS Cards contain relays to route the traffic to either its regular PRI Card, or onto the panels protection bus where the traffic is routed to the protection card. This APS card is compatible with the T1/E1 PRI CE MAUs.

CHANNEL FILLER PLATES This package includes six channel unit filler plates. These are used to protect unused channel unit positions on a 3600 common carrier card (90-1234-01).

CLOCK CARD AM-2 clei Identical to 90-0641-01 but provides enhanced alarm I/O capabilities (AM-2). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

CLOCK CARD This card is used in the 3600 Switching Shelf to provide the system clocking (Stratum-3) for the 3600 Multi Shelf System. One Clock Card is required per 3600 Switching Shelf.

COMMON CARRIER CARD clei The Common Carrier card allows up to four channel units to interface to a 3600. Plugs into any UCS. Provides metallic test access relays for customer loop testing. A front cover (90-3647-01) is required when this card is used in Class B or EU application. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

COMMON CARRIER CARD The Common Carrier card allows up to four channel units to interface to a 3600. Plugs into any UCS. Provides metallic test access relays for customer loop testing. A front cover (90-3647-01) is required when this card is used in Class B or EU application. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

COMPANDING CON. MODULE Daughter card for the single T1 interface card (90-0093-05) or the single E1 interface card (90-0371-02). Provides for A law to Mu law conversion.