Бесплатный телефон по России: 8 800 33-333-08
       
English  Русский 
Каталог
Валюта:

Сортировать по: наименованию (возр | убыв), цене (возр | убыв), рейтингу (возр | убыв)

1   2   3   4   5   6    ...   9   след >>

36LG R8.0 CD CUST DOC Complete customer documentation package for Generic 1118.0 of the 3600 Mainstreet Bandwidth Manager; Generic C/D/E/H118.0 of the 3645 Mainstreet High Speed Bandwidth Manager; Generic Q118.0 of the 3664 Mainstreet Fractional Access Multiplexer; Release 8.0 of the 3600+ Mainstreet High Capacity Bandwidth Manager; and Release 3.0 of the 36120 Mainstreet Packet Transfer Exchange in a CD ROM format.
Доступно под заказ
36LG REL 8.0 CUST DOC Complete customer documentation package for Generic 1118.0 of the 3600 MainStreet Bandwidth Manager; Generic C118.0 of the 3645 MainStreet High Speed Bandwidth Manager; Generic Q118.0 of the 3664 MainStreet Fractional Access Multiplexer, Release 8.0 of the 3600+ Mainstreet High Capacity Bandwidth Manager; and Release 3 of the 36120 MainStreet Packet Transfer Exchange in an 8 1/2 x 11 format.
Доступно под заказ
36LG REL 9 CUST DOC Complete customer documentation package for Generic 1119.0 of the 3600 MainStreet Bandwidth Manager; Generic C119.0 of the Multi Shelf System (former 3645); Release 9.0 of the 3600+ Mainstreet High Capacity Bandwidth Manager; and Release 3 of the 3600 with FastBus Option(former 36120)
Доступно под заказ
CSU-2 MODULE clei Required for compliance to PUB-62411. Required to connect direct to T-1 lines from carrier; powered from system only; no wetting current; includes circuitry for bypass switching; does not include circuitry for redundancy switching. For use with T1 (90-0093-05) DT1 (90-1625-02) and DT1-2 (90-1625-02) as well as T1 Based 3630 systems. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
DUAL E1 CARD 3 DISTRIBUTION CABLE This cable assembly is used to connect 90-9244-01 DUAL E1 CARD 3 (75 OHM), and 90-9244-02 DUAL E1 CARD 3 (120 OHM) with the distribution panel. The part number for the distribution panel is; 90-2635-02 DUAL E1 CARD 3 DISTRIBUTION PANEL. The cable and distribution panel together provide a means to connect the Dual E1 card circuits to external equipment.
Доступно под заказ
E1-75 OHM LIM MODULE clei One per E-1 circuit required to interface to G.703 75 ohm asymmetrical; includes enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
FASTBUS INTERCONN PANEL Panel that terminates up to 12 STP modules (90-1832-01) and optionally, 2 cascade modules; either STP (90-1651-01) or fibre (90-1653-01). Unused positions must be stuffed with bypass modules (90-1652-01). Includes backplane, card file, 2 STP modules (90-1832-01) and 13 bypass modules (90-1652-01)
Доступно под заказ
RING GENERATOR PSU The Ring Generator PSU is intended for use with the External Ring Generator assembly (90-5945-01), and 3600 system power trays (90-3669-xx). The Ring Generator PSU includes one ringing power supply unit (PSU) and grounding wire. There are some switches on the product to select; DC bias, and operation frequency (16Hz, 20Hz, or 25Hz). The External Ring Generator configuration requirements: dual output, redundant operation = 4 Ring Generator PSU; single output, redundant operation = 2 Ring Generator PSU; dual output, non-redundant operation = 2 Ring Generator PSU.
Доступно под заказ
T1 LIM MODULE clei One per T-1 circuit required for operation with external CSU or for systems requiring a DSX-1 electrical interface; provides enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
2.048 E1 MBPS CARD (120 OHM) Similar to 90-0371-02 but tailored for 120 OHM application. Supports rear AMP CHAMP signal access only. Requires one 90-0568-02 (120 ohm) E1 LIM.
Доступно под заказ
2.048 E1 MBPS CARD (75 OHM) Mother card for single 2.048 Mbps E1 electrical interfaces. Conforms to CCITT G.703 and G.732. Requires the E1 LIM (90-0568-01) daughter card to complete the interface. The Superrate Adaptor Module (90-0469-01) for E1/T1 rate conversion or the Companding Conversion Module (90-0369-01) for A-law, Mu-law conversion are also supported.
Доступно под заказ
23IN ADAPTOR (2 UNIT) Adaptor plate required to mount the 90-0890-01, 90-0890-02, and 90-1236-01 assemblies or any other 19 inch rack mount assemblies of two vertical units, to a 23 inch rack.
Доступно под заказ
23IN CARD FILE ADAPTOR Adaptor plate required to mount 90-0010-02, 90-0010-04, and 90-0010-10 3600 shelves to 23 equipment racks. Only one required.
Доступно под заказ
23IN DIST PANEL ADAPTOR Adaptor plate required to mount 90-0348-01, 90-0349-01, 90-1066-01 and 90-0350-01 distribution panels in 23 inch equipment racks. Only one required.
Доступно под заказ
27LC3-12 LINE CARD The 27LC3 line card is used in the 3600 and 3600+ Mainstreet. This card provides twelve 2B1Q interfaces to 275X Extended Range Data Termination Units(DTU's). Data Format for each circuit is 2B+D, with an effective throughput of 144KBPS.
Доступно под заказ
2B1Q-27LC2 LINE CARD (6 CCT) This card provides six 2B1Q interfaces to 270X Extended Range Data Termination Units (DTU's). Data Format for each circuit is 2B+D, with an effective throughput of 144KBPS. This card is for use in 360 0/3645 systems, and is the mother card for the DPM1 (90-0297-02) and DPM2 (90-0616-01).
Доступно под заказ
3600 ATM AAL1/5 (E1) SERVICES CARD Provides AAL1 and AAL5 service adaptation, Cell Multiplexing (UNI 3.1) and n x E1 (n=1, 2, 3 or 4) aggregate trunks. Also provides ATM Inverse Multiplexing (IMA). A front cover (90-3647-01) is required when this card is used in Class B or EU applications.
Доступно под заказ
3600/45 KIT US-BASIC This installation kit contains cables/screws/antistatic strap/ground wire/spade lugs in order to install a 3600/45 single shelf into a rack or cabinet.
Доступно под заказ
36LG GFC-2 FILLER PLATE A single filler plate used in place of the GFC-2 card in slot 12. This filler plate is used to maintain cooling requirements for partially filled 3600 shelves. This plate can be used for either EMC or non-EMC shelves.
Доступно под заказ
36LG REL 8.0 CD S/W This kit provides node software for the current maintenance version of 36LG Rel 8.0. Includes CD ROM.
Доступно под заказ

1   2   3   4   5   6    ...   9   след >>

(пусто)
 
Блог / Новости
Голосование