HSPS-2 FILLER PLATES This package contains eight full height and eight half height slot-filler plates for the 3600 High Speed Peripheral Shelf-2 (90-0652-02). These are used to maintain cooling requirements for partially filled High Speed Peripheral Shelf-2's.

This filler plate is intended for use in Single Shelf Redundant applications and is to be installed in Slot 10.

SINGLE SHELF RED FILLER PLATE This filler plate is intended for use in Single Shelf Redundant applications and is to be installed in Slot 10.

36LG GFC-2 FILLER PLATE A single filler plate used in place of the GFC-2 card in slot 12. This filler plate is used to maintain cooling requirements for partially filled 3600 shelves. This plate can be used for either EMC or non-EMC shelves.

3600 UCS SLOT FILLER CARD

EXP MOD 6+2

EXP MOD 8+8

EXP MOD 16+ Expansion module required by the Expander Card (90-0035-0x) when card slot bandwidth greater than 1.920 Mb/s (30 DS0) is required. This module will allow Generic 1113 or greater systems equipped with Control Card 2 (90-0050-04), an expansion capability of up to 16 slots, each capable of providing 3.830 Mb/s (60DS0) of bandwidth.

EXP MOD (16+) Expansion module required by the Expander Card (90-0035-0x) when card slot bandwidth greater than 1.920 Mb/s (30 DS0) is required. This module will allow Generic 1113 or greater systems equipped with Control Card 2 (90-0050-04), an expansion capability of up to 16 slots, each capable of providing 3.830 Mb/s (60DS0) of bandwidth.

GFC-2 (UK) This General Facilities card allows for order wire access, diagnostics, and alarming. Order wire facility offers A-Law companding, and alarming facility is according to BT TEP-1E. Offers a reduced width faceplate with card extraction levers.

GENERAL FACILITY CARD GFC-2 This General Facilities card allows for order wire access, diagnostics, and alarming. Order wire facility offers A-Law companding, and alarming facility is according to BT TEP-1E. Offers a reduced width faceplate with card extraction levers.

GFC-2 ALAW AM-2 (EMC) This assembly is a variant of the 90-0077-06 providing enhanced alarm I/0 capabilities (Alarm Module 2). Meets Class B EMC.

GFC-2 ALAW AM-2 60V EMC Similar to 90-0077-05, but tailored for Siemens.

GENERAL FACILITY CARD GFC-2 NA This General Facilities card supports the same functionality as 90-0078-03 but offers a reduced width faceplate with card extraction levers. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

GFC-2 NA clei This General Facilities card supports the same functionality as 90-0078-03 but offers a reduced width faceplate with card extraction levers. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

GFC-2 MULAW AM-2 Identical to 90-0078-04, but with enhanced alarm I/O capabilities (Alarm Module 2).

GENERAL FACILITY CARD GFC-2 MULAW AM-2 Identical to 90-0078-04, but with enhanced alarm I/O capabilities (Alarm Module 2).

E&M (6) ZCO (8-7/1-14)A This card consists of six E<(>&<)>M interface circuits software configurable for 2 wire (ZCO) or 4 wire (600 ohms) transmission. Type V signalling and A-law voice companding are supported. This card also includes modified gain selections supported by generic 1113 or greater.

E&M (6) 600 (8-7/1-14)A This card consists of six E<(>&<)>M interface circuits for 2 or 4-wire transmission. Type V signalling and A-Law voice companding are supported. A line impedance of 600is supported for both 2-wire and 4-wire operation. This card also includes modified gain selections supported by generic 1113 or greater.

E&M (6) 600 (8-7/1-14)A This card consists of six E&M interface circuits for 2 or 4-wire transmission. Type V signalling and A-Law voice companding are supported. A line impedance of 600is supported for both 2-wire and 4-wire operation. This card also includes modified gain selections supported by generic 1113 or greater.