SINGLE E1 RED Y-CBL This cable is for use with the 3600+ Octal E1(90-3542-0x) The cable is used to connect two E1 ports in a redundant configuration.

SINGLE SHELF (8 UCS) clei 3600 Single Shelf or 3600 multi shelf with rear access to all shelf connections and compatible only with the -48/60V DC Power supply (90-9524-02) and tray (90-3669-03). Provides backplane access to a total of eight Universal Card Slots. Includes backplane, cardfile and GFC filler plate. Requires new Balanced Transceiver Cards and Cables (90-0090-06 and 90-0090-07) when configured for dual shelf and/or control redundancy operation. Meets Class B EMC requ irements. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

SINGLE SHELF (8 UCS) clei 3600 Single shelf or 3600 multi shelf with rear access to all shelf connections and compatible only with the AC power supply (90-9524-01) and tray (90-3669-11). Provides backplane access to a total of eight Universal Card Slots. Includes backplane, cardfile an GFC filler plate. Requires new Balanced Transceiver Cards and Cables (90-0090-06 and 90-0090-07) when configured for dual shelf and/or control redundancy operation. Meets Class B EMC requirements

SINGLE SHELF (8 UCS) clei 3600 Single Shelf or 3600 multi-shelf system peripheral unit is compatible with either AC power supplies (90-9524-01) and trays (90-3669-11 single feed, or 90-3669-12 dual feed) or DC power supply (90-9524-02) and trays (90-3669-03). The shelf has 8 universal card slots for various resource and line cards, plus the capacity to support redundant power and control..

SINGLE SHELF RED FILLER PLATE This filler plate is intended for use in Single Shelf Redundant applications and is to be installed in Slot 10.

SINGLE T1 RED Y-CBL EMC This cable is for use with the 3600+ Octal T1(90-3541-01). The cable is used to connect two T1 ports in a redundant configuration.

SINGLE T1 RED Y-CBL This cable is for use with the 3600+ Octal T1(90-3541-01). The cable is used to connect two T1 ports in a redundant configuration.

SMZ TO BNC 75OHM CABLE - 4P OC3/STM1 ELE This cable is used to connect the quad OC3/STM1 Electrical CR card to a patch panel at the rear of the cabinet.

SPARE PS-1 FAN FILTERS - PKG OF 20 This is a package of 20 replacement air filters for the 36170 Peripheral Shelf -1 (90-2190-01), the Switching Shelf (90-2181-01) and the High Speed Peripheral Shelf (90-2291-01).

SPARE PS-2 INTEGRATED COOLING UNIT clei This assembly is a replacement Integrated Cooling Unit for the 36170 Peripheral Shelf - 2 (PS-2 90-4907-01). It contains three fan assemblies and an alarm/power distribution assembly in an integrated package. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

SPARE S.S/PS-1/HSPS INTEG COOLING UNIT This assembly is a replacement Integrated Cooling Unit for the 36170 Switching Shelf (90-2181-01), Peripheral Shelf -1 (90-2190-01) and High Speed Peripheral Shelf (90-2291-01). It contains two fan assemblies and an alarm/power distribution assembly in an integrated package.

SPARING CABLE 0

STM1-2M CR MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R4.3 S/W.

STM1-2M CR MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.

STM1-2M CR MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification(Version 3.1) and the ATM Forum B-ICI Specification(Version 2.0). Requires a minimum of Release 4.2 for operational support. This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM,90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R5.0 software. Note that only the eTM is supported for traffic shaping on the ESE. MD EFFECTIVITY DATE = AUGUST 1, 2004 AS PER PDN 9199.

STM1-2M EL W/CPU-2 (MAU EXCLUDED) The R5.0 STM1-2 Electrical Interface Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The electrical interface is dual coaxial BNC connectors. The line code is code mark inversion (CMI). The STM1-2 Electrical Interface is a single port card compliant to the requirements of the ATM Forum UNI Specifications (Version 3.1) and the ATM Forum B-ICI Specifications (Version 2.0). Requires a minimum of R elease 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card requires MAU 90-2322-01 for deployment in 7470 PS-2 shelf or MAU 90-8180-01 for deployment in 7670 ESE shelf. The 90-2322-01 and 90-8180-01 MAUs are not shipped with the STM1-2 card and each must be ordered separately. The STM1-2 Electrical Interface card with CPU-

STM1-2M EL W/CPU-2 (MAU EXCLUDED) The R5.0 STM1-2 Electrical Interface Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The electrical interface is dual coaxial BNC connectors. The line code is code mark inversion (CMI). The STM1-2 Electrical Interface is a single port card compliant to the requirements of the ATM Forum UNI Specifications (Version 3.1) and the ATM Forum B-ICI Specifications (Version 2.0). Requires a minimum of R elease 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card requires MAU 90-2322-01 for deployment in 7470 PS-2 shelf or MAU 90-8180-01 for deployment in 7670 ESE shelf. The 90-2322-01 and 90-8180-01 MAUs are not shipped with the STM1-2 card and each must be ordered separately.

STM1-2M EL W/CPU-2 R4.3 The STM1-2 Electrical Interface Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The electrical interface is dual coaxial BNC connectors. The line code is code mark inversion (CMI). The STM1-2 Electrical Interface is a single port card compliant to the requirements of the ATM Forum UNI Specifications (Version 3.1) and the ATM Forum B-ICI Specifications (Version 2.0). Requires a minimum of Release 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) which, when installed, provides enhanced traffic management features. Each STM1-2 Electrical Interface is shipped with a MAU 2 Coax Adapter (90-2322-x1). This card variant is shipped with R4.3 S/W.

STM1-2M IR W/CPU-2 The STM1-2M IR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach (IR) single mode fiber optical interface has a total loss budget of 12 db. The STM1-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R4.3 S/W.

STM1-2M IR W/CPU-2 The STM1-2M IR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach (IR) single mode fiber optical interface has a total loss budget of 12 db. The STM1-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.