36SM INSTALLATION KIT Contains DB25 to RJ45 cable adaptors, RJ45 cables, anti-static strap, miscellaneous tools and mounting hardware required to install one 2902, 3612, 3620, 3624, or 3630 wall mount system.

36SM FRM S/W UPG KIT R3.0 This kit upgrades existing 36SM Frame Relay Modules to Rel 3.0 functionality. Includes 3.5 inch diskette.

36SM DSP VOFR/CELP MOD (G729) Module provides compression of two 64 KBPS voice channels into either 8 KBPS voice channel C/W signalling. Provided in this variant of module is VOFR or A CELP basic voice coding schemes support for end user applications. Can be inserted into any tributary module position. Requires 3612 Release 8 or higher.

36SM DSP VOFR/CELP 4CH MODULE (G729A) Identicle to 90-0591-06 except it supports 4 channels and the TDM voice is G729A.

36SM DSP MF MOD Module provides compression of two 64 KBPS voice channels into either 8 Kbps or 16 KBPS voice channels C/W signalling. 8K or 16K mode is software selectable on an individual port basis. Also provides support for dual channel fax, ST-HCV and AC15 functionality on a single resource module. Can be inserted into any aggregate or tributary position. Requires 3612 Release 7.

36SM DSP A/LD-CELP MOD (A/LD-G729/G728) Module provides compression of two 64 KBPS voice channels into either 8 KBPS or 16KBPS voice channel C/W signalling. Provided in this variant of module is A or LD CELP basic voice coding scheme support for end user applications. Can be inserted into any tributary module position. Requires 3612 Release 8 or higher.

36SM DSP A-CELPH MOD (A-CELPA G729A 4CH) Module provides compression of four 64 KBPS voice channels into either 8 KBPS voice channel C/W signalling. Provided in this variant of module is A-CLEPA basic voice coding scheme support for end user applications. Can be inserted into any tributary module position. Requires 3612 Release 8 or higher.

36SM 2B1Q MODULE Single 2B1Q Module connecting any of the following data termination units: 2751 RS-232/V.24 DTU, 2752 X.21 DTU, and 2753 V.35 DTU providing the node S/W supports the DTU.

3612/3624/3630 WALL MOUNT BRACKET A pair of brackets that will allow a 3612, 3624,or 3630 system (90-0575-68, 90-0411-57,90-0411-58, 90-0412-52,90-0412-58, 90-2002-04, and 90-2003-03) to be wall mounted.

3612/24 UDP W/EX CVR clei Base distribution panel for use with 3612 and 3624 systems. It will allow installation of up to four 36SM personality modules for interface adaption. Includes an extended cover (90-2302-01) which allows for installation of the V.35/M34 personality module (90-2258-04). Cables that connect the Basic System to the Universal Distribution Panel are sold separately (90-234x-xx). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

3612 R8 S/W KIT Set of five EPROMls containing the latest revision of software B218. Note: Cannot be used with control module 90-0576-01, 90-0576-02, or 90-0576-04. Can only be used with Control Card 90-0576-05.

3612 R8 100-240VAC SYSTEM Desktop, wall-mount, 19 rack-mount system accommodates up to four aggregates and twelve channel modules. Includes chassis, internal power supply(100-240VAC) with integral ringing generator(factory configured for 25Hz, use reconfigurable to 20Hz), Control Module 3 (90-0575-05),backplane, and the latest version of generic B218(90-0599-80). Optional slide assembly(90-9084-01), optional wall mount bracket(90-0338-04), and customer documentation(90-0582-08) to be ordered separately.

3612 FRAME RELAY MOD R3.0 The FRM is a 15-port Frame Relay switch that occupies a single slot position within the 3612 and supports FR traffic at n*8k and super-rate speeds. Requires 3612 Release 8. This release introduces DLCI multiplexing.

3612 E1 TRIB MOD (BNC) WITH ADAPTER Provides a E1 interface to a co-located PBX, video codec, bridge, router or data device. AQA(Activity Qualified Access) monitoring control is supported as a function by this module. Occupies one module position and is capable of running up to 15 DS0s connections to the aggregate. User interface is 75 ohm BNC.

3612 E1 AGGREGATE-RJ45 WITH ADAPTOR PLAT This E1 Aggregate, with a 120 ohm RJ45 connector, takes up a single aggregate slot position within the 3612. It supports up to 8 circuits and can be used for either an aggregate connection or interfacing to a local PBX. Functionally identical to 90-2846-02 but includes internal cable and adaptor plate for use with Rack Mount 3612 (90-0575-68).

3612 E1 AGGREGATE-BNC WITH ADAPTOR PLATE This E1 Aggregate, with a 75 ohm BNC connector, takes up a single aggregate slot position within the 3612. It supports up to 8 circuits and can be used for either an aggregate connection or interfacing to a local PBX. Functionally identical to 90-2846-01 but includes internal cable and adaptor plate for use with Rack Mount 3612 (90-0575-68).

3612 CPSS MODULE Allows CPSS operation over satellite links terminating on 3612 aggregate modules. All four aggregates can support satellite CPSS with this card installed. Mounts on control card, either 90-0576-02 o r 90-0576-05.

3612 CONTROL CARD 4 Spare control card offering up to 2MB memory space. Supports Generic 3612 R5 S/W load or higher (90-0599-xx). Software Kit must be ordered separately (90-0599-xx).

.19 UDP RM BRKT Mounting bracket used for mounting two 3620 Distribution Panels (90-2255-01) or two 3612/24 Base Distribution Panels (90-2256-01) or one 3630 Base Distribution Panel (90-2257-01) into a 19 rackmount c onfiguration. Personality modules and Base Distribution Panels ordered separately.

V.35 PFRA DCM MODULE (PUBLIC FR ACCESS) Single V.35 module providing for a single V.35 compatible interface (DTE or DCE) per module. Three control leads are supported; DCD/RTS/ALB when configured as DCE. Both HCM and transparent speeds are supported up to 64KBPS, for speeds higher than 64KBPS refer to node documentation. These modules can be used to derive a clock for system synchronization. Enhanced for public frame relay access.<(><<)> p>NOTE: MUST NOT for USED in 3624 APPLICATIONS or damage will occur to the system itself.