FXS (LGS) MODULE (LR) Single FXS (LGS) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit; this module provides line reversal capability and increased loop performance. Module operates as FXS, PLAR or DPO circuits. Recommended for all new installations.

FXS (LGS) MODULE (A-LAW) Single FXS (LGS) module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of 0 to -7DB; module provides line reversal capability.

FXO (LGE) MODULE (0/-7DB) Single FXO (LGE) module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -7 DB; module operates as FXO or DPT circuits.

FXO (LGE) MODULE (+4/-10DB) clei Single FXO (LGE) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10 DB for receive and +3 to -4 DB for transmit; module operates as FXO or DPT circuits. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

E1-75 OHM LIM MODULE clei One per E-1 circuit required to interface to G.703 75 ohm asymmetrical; includes enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

E&M MODULE (TYPE 5) Single E&M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +8.5 DB to -7DB in 2W mode and -5 to -16 in 4W mode; module employs Type 5 signaling.

E&M MODULE (TYPE 1) Single E&M module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signaling.

E&M MODULE (A-LAW) Single E&M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5 DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signaling. (Type 2 signaling is supported by a special wiring configuration that requires separate external 48VDC source).

E&M MODULE (+4/-10 DB) clei Single E&M module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10.5DB for receive and +4 to -3.5DB for transmit. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB. Module employs Type 1 or Type 2 signalling. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

CSU-2 MODULE clei Required for compliance to PUB-62411. Required to connect direct to T-1 lines from carrier; powered from system only; no wetting current; includes circuitry for bypass switching; does not include circuitry for redundancy switching. For use with T1 (90-0093-05) DT1 (90-1625-02) and DT1-2 (90-1625-02) as well as T1 Based 3630 systems. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.