Coupler 6GHz uneql. 6dB

Coupler 7/8 EQUAL 3dB 2ODUSF

Coupler 7/8GHz uneql. 6dB

CPSS MODULE

CR/IMA MODULE FOR T1/E1 MS CARDS CLEI This optional, field-installable module provides T1/E1 Cell Relay functionality, enabling the 32 port T1/E1 multi-service card (7670 ESE) or 16 port T1/E1 MS card (7470 MSP) to deliver both Circuit Emulation and Cell Relay services. Cell Relay services are provisionable per DS1/E1 circuit. Up to 16 IMA groups are supported per module when used with the 32 port T1/E1 MS card, or 8 IMA groups per module when used with the 16 port T1/E1 MS card. The IMA implementation is compliant to the ATM Forum IMA specification Version 1.0 or 1.1. IMA v1.0 or v1.1 is configurable on a per T1 or per E1 basis.

Craft terminal cable & USB adapt.

CTL & INTEG. CALLP/PNNI UPGRADE KIT This kit is used to upgrade an R5.0 (or higher) Control or Integrated CallP/PNNI card to the enhanced Processor Module (ePM) and larger (256M) SanDisk. Factory shipments of R5.0 and higher Control and Integrated CallP/PNNI cards ship with the ePM installed, and with the larger SanDisk included, and do not require this upgrade kit. The kit contains an ePM (333 MHz PowerPC 755 module with 512M RAM), 256M SanDisk, part number labels and instructions for installation. This kit is also suitable for IP Services Cards (90-6184-xx) requiring upgrade.

CTL CARD I/O PNL INTERNATIONAL The Control Card I/O Panel provides connectorization for both the active and standby Control Cards. The interfaces provided are: Ethernet 10BaseT, RS-232, and External clock inputs/outputs via BNC co nnectors (2meg).

CTL CARD I/O PNL INTERNATIONAL The Control Card I/O Panel provides connectorization for both the active and standby Control Cards. The interfaces provided are: Ethernet 10BaseT, RS-232, and External clock inputs/outputs via BNC co nnectors (2meg).

CTL CARD I/O PNL US TEL clei The Control Card I/O Panel provides connectorization for both the active and standby Control Cards. The interfaces provided are: Ethernet, 10BaseT, RS-232, and BITS clock inputs. (Wire wrap posts 1.544 meg). 1VU brackets for mid-mounting shipped with this assembly for mid-mounting. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

CTL CARD I/O PNL US TEL clei The Control Card I/O Panel provides connectorization for both the active and standby Control Cards. The interfaces provided are: Ethernet, 10BaseT, RS-232, and BITS clock inputs. (Wire wrap posts 1.544 meg). 1VU brackets for mid-mounting shipped with this assembly for mid-mounting. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

CTL TO INTEGRATED CTL CONVERT KIT The Control to Integrated Control conversion kit is used to convert a 7470 Control card to an Integrated Control card. The kit contains the password to enable the conversion and instructions for installation. This kit must be executed during an upgrade process prior to installing a release that is greater than Release 7. Integrated control software is mandatory for all 7470 systems operating above Release 7.0. The Integrated Control Card software required for the conversion is not included in this kit and must be obtained from the Alcatel TAC and TAC must be involved in any upgrade that requires this kit.

CTRL CARD PRI APS The PRI APS Control Card in combination with the I/F CARD PRI APS (90-6345-02) and E1/T1 PRI APS SHELF (90-6344-01) provides N:1 Automatic Protection Switching support for T1/E1 CE Cards on the 36170. Each T1/E1 Card serving as a protection card on the 36170 must be connected to an APS Control Card in the APS Shelf. The APS Control Card controls the relays on APS Interface Cards and allows multiple N:1 protection groups to be supported within the same PRI APS Shelf.

CTRL CARD T1/E1 APS The T1/E1 APS Control Card in combination with the I/F CARD T1/E1 APS (90-6345-02) and T1/E1 APS SHELF (90-6344-01) provides N:1 Automatic Protection Switching support for T1/E1 CE Cards on the 7470. Each T1/E1 Card serving as a protection card on the 7470 must be connected to an APS Control Card in the APS Shelf. The APS Control Card controls the relays on APS Interface Cards and allows multiple N:1 protection groups to be supported within the same T1/E1 APS Shelf.

CWDM 1470NM APD SFP DDM

CWDM 1470NM APD SFP DDM

CWDM 1470NM APD SFP DDM

CWDM 1470NM PIN SFP DDM

CWDM 1470NM PIN SFP DDM

CWDM 1470NM PIN SFP DDM