R4.3 CTL & INTEG. CALLP/PNNI UPGRADE KIT This kit is used to upgrade an R4.3 Control or Integrated CallP/PNNI card to the enhanced Processor Module(ePM) and larger NOR Based (256M) memory card. Factory shipments of R4.3 Control and Integrated CallP/PNNI cards ship with the ePM installed, and with the larger memory card included, and do not require this upgrade kit. The kit contains an ePM (333 MHz PowerPC 755 module with 512M RAM), 256M memory card, part number labels, and instructions for installation. Note: The NOR-Based memory card is replaced by a NAND-based memory card for later loadsets of R4.3. Be aware that this part supplies the older NOR based memory card and that you should check with Product Management before ordering this part. Field Notice FN1867 provides more details.

SERVICE CARD-2 UPGRADE KIT This kit is used to upgrade an R4.3/5.0 Service Card-2 (CallP, PNNI or Data Spooling card) to the enhanced Processor Module (ePM). Factory shipments of R4.3 Service Card-2 and higher cards ship with the ePM installed and do not require this upgrade kit. The kit contains an ePM (333 MHz PowerPC 755 module with 512M RAM), part number labels and instructions for installation.

T1/E1 16 PORT RJ45 DIST. PANEL clei This 1 meter cable connects one 16 port T1 or E1 Frame Relay card (90-7277-xx) to two 8 port T1/E1 RJ-45 Distribution Panels(90-2543-X1).

T1/E1 16 PORT RJ45 DIST. PANEL clei This PRI RJ45 Distribution Panel provides 16 external RJ45 interfaces to the 100 ohm T1 or 120 ohm E1 twisted pair ports of a PRI card. It may be used with PRI cards 90-4671-x1/x2, 90-2541-x1/x2, 90-2517-x1/x2, and 90-7277-xx. The panel is a 1 vertical unit (VU) high rack-mountable device. This panel is shipped with 1VU mid-mount brackets. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

QUAD ENET MAU This 3 meter cable connects one 16 port T1 or E1 Frame Relay card (90-7277-xx) to one 16 port T1/E1 Distribution Panel (90-8307-X1). This cable may also be used to connect one 16 port E1 Frame Relay card(90-7277-xx) to two 8 port E1 75 ohm Distribution Panels(90-6398-X1).

This optional module for the Control Card (90-4452-xx) provides system timing which can be derived from any line interface or BITS input (90-4451-01/03/04). This module has a wider capture range (+/- 50ppm) than the Stratum 3 SSU. Note, however, that this is not a Stratum 3 clock source. Stratum 3 timing requires part no. 90-6499-01. This part satisfies the Australian regulatory requirement for CPE devices as stated in TS016.

QUAD ENET MAU Four port 10BaseT/100BaseTX Electrical Interface MAU. To be used in conjunction with 90-7696-xx.

350 IVSN EXAUST CCIP NA

QUAD 10/100BASE-T ETHERNET W/O clei Four port 10/100 Base-T Ethernet card for 7470. This card requires MAU 90-8017-01 (4 port 10BaseT/100BaseTX Electrical Interface MAU).

QUAD 10/100BASE-T ETHERNET W/O MAU R5.0 Four port 10/100 Base-T Ethernet card for 7470. This card requires MAU 90-8017-01 (4 port 10BaseT/100BaseTX Electrical Interface MAU). This card is delivered with R5.0 software.

QUAD 10/100BASE-T ENET CARD clei Four port 10/100 Base-T Ethernet card for 7470. Included is a 4 port 10BaseT/100BaseTX Electrical Interface MAU (90-8017-01). This card is delivered with R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

ENHANCED TRAFFIC MGNT MOD. clei The Enhanced Traffic Management (ETM) module is an optional module for the DS3-2, E3-2, OC3-2,STM1-2, OC3-2M and STM1-2M cell relay line cards. It provides the Traffic Management features of the Titan ASIC, including increased cell buffer size (1M cells), Weighted Fair per-VC Queuing (WFQ) for all service categories, ingress and egress per-VC shaping, VP Aggregation and ABR VS/VD and ER marking, in addition to the features and functionality provided by the MTSM module. Requires a minimum of R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

ENHANCED TRAFFIC MGNT MOD. Clei The Enhanced Traffic Management (ETM) module is an optional module for the DS3-2, E3-2, OC3-2,STM1-2, OC3-2M and STM1-2M cell relay line cards. It provides the Traffic Management features of the Titan ASIC, including increased cell buffer size (1M cells), Weighted Fair per-VC Queuing (WFQ) for all service categories, ingress and egress per-VC shaping, VP Aggregation and ABR VS/VD and ER marking, in addition to the features and functionality provided by the MTSM module. Requires a minimum of R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

This package provides spares for parts that are currently shipp ed with the 7270 shelves. It contains a power cord rubber feet PCMCIA card covers blank faceplates for BITs Alarm and Control I/O card and 19in and 23in mounting rails and screws.

S/W DOWNLOAD KEY 27LC3 REL 2 Software download for Rel 2.0 of the 27LC-3 card.

3600 Switching Shelf Downloadable Memory module. Used with 3600 Control Card (90-0667-0x). Contains Release 8.0 Software. This module will be MD in mid-2002.

3600 peripheral Shelf Downloadable Memory module. Used with 3600 Control Card (90-0667-0x). Contains Release 8.0 Software. This module will be MD in mid-2002.

3600 Downloadable Memory module. Used with 3600 Control Card (90-0667-0x). Contains Release 8.0 Software. This module will be MD in mid-2002. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.+

FRE S/W DNLOAD KEY P414-H3 3600 FRE Release 4.3 software download key for FRE cards 90-1638-28 and lower with software generics P41X-XX-XX. For FRE card 90-1638-30, order 90-7609-04 FRE S/W DNLOAD KEY P424-H3.

SPARE PS-2 AIR FILTER - PKG OF 10 Replacement air filters for the Peripheral Shelf 2 (90-4907-01); Package of 10.