Наш телефон: 8 921 751-66-99
       
English  Русский 
Каталог
Валюта:

Сортировать по: наименованию (возр | убыв), цене (возр | убыв), рейтингу (возр | убыв)

<< пред   1   ...  119   120   121   122   123   124   125   126   127   128   129    ...   187   след >>

OC3-2M IR W/CPU-2 clei The OC3-2M IR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach(IR) single mode fiber optical interface has a total loss budget of 12db. The OC3-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM,90-7695-01) which, when installed,provides enhanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
OC3-2M IR W/CPU-2 clei The OC3-2M IR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach(IR) single mode fiber optical interface has a total loss budget of 12db. The OC3-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM,90-7695-01) which, when installed,provides enhanced traffic management features. This card is also supported on R2.0 of the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE.
Доступно под заказ
OC3-2M LR W/CPU-2 clei The OC3-2M LR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical inerface has a total loss budget of 28db. The OC3-2M LR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R4.3 S/W. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
OC3-2M LR W/CPU-2 clei The OC3-2M LR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical inerface has a total loss budget of 28db. The OC3-2M LR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
OC3-2M LR W/CPU-2 clei The OC3-2M LR UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical inerface has a total loss budget of 28db. The OC3-2M LR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.
Доступно под заказ
OC3-2M MMF W/CPU-2 clei The OC3-2M MMF Card with CPU-2 is a local ATM (LATM) OC3 interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The OC3-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R4.3 S/W.
Доступно под заказ
OC3-2M MMF W/CPU-2 clei The OC3-2M MMF Card with CPU-2 is a local ATM (LATM) OC3 interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The OC3-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.
Доступно под заказ
OC3-2M MMF W/CPU-2 clei The OC3-2M MMF Card with CPU-2 is a local ATM (LATM) OC3 interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The OC3-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.
Доступно под заказ
OC3-2M MMF W/CPU-2 The OC3-2 MMF Card with CPU-2 is a local ATM (LATM) OC3 interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF)optional interface has a typical range of 2km. The OC3-2 MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). Requires a minimum of Release 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Module (MSTM 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. MD EFFECTIVITY DATE = AUGUST 1, 2004 AS PER PDN 9199.
Доступно под заказ
OC3/STM1 IR SFP clei 1-port OC-3/STM-1 SONET/SDH Optics Module, IR-1 / I-1, 1310 nm, LC Connector. Can be used in the Quad OC3/STM1 SFP Cell Relay card (90-8687-25) or OC3/STM1 1:N Working I/O (90-9785-02) (in ESE R5.X) or OC3/STM1 1:N Protecting I/O (90-9785-03) (in ESE R5.X). This unit is equipped with a Class 1 laser.
Доступно под заказ
OC3/STM1 LR SFP clei 1-port OC-3/STM-1 SONET/SDH Optics Module, LR-1 / L-1.1, 1310 nm, LC Connector. Can be used in the Quad OC3/STM1 SFP Cell Relay card (90-8687-25) or OC3/STM1 1:N Working I/O (90-9785-02) (in ESE R5.X) or OC3/STM1 1:N Protecting I/O (90-9785-03) (in ESE R5.X). This unit is equipped with a Class 1 laser.
Доступно под заказ
OC3/STM1 MMF SFP clei 1-port OC-3/STM-1 SONET/SDH Optics Module, MM, 1310 nm, LC Connector. Can be used in the Quad OC3/STM1 SFP Cell Relay card (90-8687-25) or OC3/STM1 1:N Working I/O (90-9785-02) (in ESE R5.X) or OC3/STM1 1:N Protecting I/O (90-9785-03) (in ESE R5.X). This unit is equipped with a Class 1 laser.
Доступно под заказ
OCTAL E1-2 PRI CR W/CPU-2 120 OHM This 120 Ohm card utilizes the CPU-2 and provides eight E1 ports for Cell Relay (ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01)to provide up to four groups of ATM Inverse Muliplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU(90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01) per card.
Доступно под заказ
OCTAL E1-2 PRI CR W/CPU-2 120 OHM This 120 Ohm card utilizes the CPU-2 and provides eight E1 ports for Cell Relay (ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01)to provide up to four groups of ATM Inverse Muliplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU(90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01) per card. This card is shipped with R5.0 software.
Доступно под заказ
OCTAL E1-2 PRI CR W/CPU-2 120 OHM This 120 Ohm card utilizes the CPU-2 and provides eight E1 ports for Cell Relay (ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01)to provide up to four groups of ATM Inverse Muliplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU(90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01) per card.
Доступно под заказ
OCTAL T1-2 PRI CR CPU-2 100ohm R4.3 clei This 120 Ohm card utilizes the CPU-2 and provides eight E1 ports for Cell Relay (ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01) to provide up to four groups of ATM Inverse Muliplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection rquires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU (90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01) per card. This card is shipped with R4.3 software.
Доступно под заказ
OCTAL T1-2 PRI CR CPU-2 100ohm R4.3 clei This card utilizes the CPU-2 and provides eight T1 ports for Cell Relay (ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01) to provide up to four groups of ATM Inverse Multiplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU (90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01) per card. This card is shipped with R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
OCTAL T1-2 PRI CR W/CPU-2 100 OHM clei This card utilizes the CPU-2 and provides eight T1 ports for Cell Relay(ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01) to provide up to four groups of ATM Inverse Multiplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU (90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01)per card.
Доступно под заказ
OCTAL T1-2 PRI CR W/CPU-2 100 OHM clei This card utilizes the CPU-2 and provides eight T1 ports for Cell Relay(ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module(90-4672-01) to provide up to four groups of ATM Inverse Multiplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx)for each card. Wire-wrap connection requires one wire-wrap MAU (90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01)per card. This card is shipped with R5.0 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.
Доступно под заказ
OCTAL T1-2 PRI CR W/CPU-2 100 OHM clei This card utilizes the CPU-2 and provides eight T1 ports for Cell Relay(ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01) to provide up to four groups of ATM Inverse Multiplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU (90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01)per card.
Доступно под заказ

<< пред   1   ...  119   120   121   122   123   124   125   126   127   128   129    ...   187   след >>

(пусто)
 
Блог / Новости
Голосование