PERIPHERAL SHELF 2 clei The Peripheral Shelf Cardfile is a 19 rackmount shelf which has 12 universal card slots (UCS) and 2 common equipment card slots (X and Y). The X (and Y if redundant fabric is required) common equipment card slot is equipped with a Dual Hub or SHUB Card. The 12 UCSs are equipped with 0, 1, or 2 Control Cards and up to 10, 11, or 12 interface cards depending on the number of Control Cards installed. One Control Card is installed for non-redundant control, two for control redundancy, and zero if Control Cards have already been installed in another Peripheral Shelf of the 7470 system. A 7470 system can be equipped with up to 8 Peripheral Shelf Cardfiles for a total of 96 UCS's. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

PERIPHERAL SHELF 2 R3.1 clei The R3.1 Peripheral Shelf Cardfile is a 19 rackmount shelf which has 12 universal card slots (UCS) and 2 common equipment card slots (X and Y). The X (and Y if redundant fabric is required) common equipment card slot is equipped with a Dual Hub or SHUB Card. The 12 UCSs are equipped with 0, 1, or 2 Control Cards and up to 10, 11, or 12 interface cards depending on the number of Control Cards installed. One Control Card is installed for non-redundant control, two for control redundancy, and zero if Control Cards have already been installed in another Peripheral Shelf of the 36170 system. A 36170 system can be equipped with up to 8 Peripheral Shelf Cardfiles for a total of 96 UCS's. This high power peripheral shelf increases the power handling capacity to allow for higher-powered cards in future releases of the 36170. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

PNNI ROUTING CARD-2 R4.3 This is a UCS card that provides switched services PNNI dynamic routing. THis card or an Integrated CallP/PNNI Card-2 are required for systems that use PNNI Routing. This card is delivered with R4.3 software.

Pole mounting for non Integrated antenna

Pole mounting MXC non-integrated ant.

Power cable 3 x 1.5mm2 L:1m

Power cable 3x1.5mm2 L:15m

Power cable 3x4mm2 L:1m

POWER CABLE N07G9-K 1X16 BLUE

POWER CABLE N07G9-K 1X16 RED

POWER CABLE N07G9-K 1x35 Y/G

Power cable to connect to -48 VDC input on the 7705. Requires quantity 2 if power feed redundancy is needed

POWER SUPPLY -48V / +24V 20M CABLE

POWER SUPPLY -48V / +24V EMC 10M CABLE

POWER SUPPLY -48V / +24V EMC 20M CABLE

POWER SUPPLY -48V / +24V EMC 3M CABLE

POWER SUPPLY -48V / +24V EMC 5M CABLE

POWER SUPPLY -48V /+24V 10M CABLE

POWER SUPPLY -48V /+24V 3M CABLE

POWER SUPPLY -48V /+24V 5M CABLE