UPG KIT INTEG/EPM TO INTEG. W/SPOOLING This kit is used to upgrade a 7470 Release 4.3-5.0 Integrated CallP or Integrated CallP/PNNI card, or 7270 Release 5.0 control card to an Integrated CallP/PNNI/Spooling card in Release 5.0. Also it is to be used to upgrade a R2.0 7670 ESE ECC (90-8396-01) to support integrated data spooling.Factory shipments of R5.0 Integrated CallP/PNNI/Spooling cards ship with the SRAM included and do not require this upgrade kit. The kit contains a 6M SRAM card, part number labels and instructions for installation. Note for the 7470 that if the card to be upgraded does not use the ePM and larger (256M) SanDisk, then the Integrated CallP or Integrated CallP/PNNI Upgrade to Integrated CallP/PNNI/Data Spooling Kit(90-8977-01) should be used instead. Note for the 7270 that if the card to be upgraded does not use the ePM and larger (96M) SanDisk, then both the 7270 control card upgrade kit (90-4452-13) and this upgrade kit are required..

36SM RM DRAWER SLIDE ASSEMBLY The drawer slide assembly is intended for use witthe 3612, 3624, and 3630 rack mount systems(90-0575-68, 90-0411-57, 90-0411-58, 90-0412-52,90-0412-58, 90-2002-04, and 90-2003-03). This slide assembly allows access to a system by pulling the chassis outward from an equipment rack.

DB78 TO DB78 CABLE (16 COAX) This cable is used to connect the 7470 8 port DS3 CR card to the 8 port 75 Ohm BNC distribution panel.

This cable is used to connect the 7670 ESE 8 port DS3 CR adapter card to the 8 port 75 Ohm BNC distribution panel.

DS3 8 PORT 75 OHM BNC DIST. PANEL clei This distribution panel provides 8 external 75 Ohm BNC ports and is to be used with the 7470 8 port DS3 CR card. The panel is a 1 vertical unit (VU) high rack-mountable device. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

SGL MODE SC-SC FIBER - 4P 0C3/STM1 IR-LR This cable is used to connect the quad OC3/STM1 IR/LR CR optical card to a patch panel at the rear of the cabinet.

SGL MODE SC-SC FIBER - 4P 0C3/STM1 IR-LR This cable is used to connect the quad OC3/STM1 MMF optical CR card to a patch panel at the rear of the cabinet.

SMZ TO BNC 75OHM CABLE - 4P OC3/STM1 ELE This cable is used to connect the quad OC3/STM1 Electrical CR card to a patch panel at the rear of the cabinet.

MAINSTREET S/W MAINTENANCE UNIT This 90- level part number is used in conjunction with S/W maintenance contracts to calculate and order s/w for the nodes within a network over the period of the contract.

R4.3 CTL TO INTEGRATED CTL CONVERT KIT The Control to Integrated Control conversion kit is used to convert a Control card to an Integrated Control card, enabling the card to perform the PNNI and Call Processing functions provided by PNNI and CallP cards in a common Control mode system. The kit contains part number labels, password to enable the conversion and instructions for installation. The software required for the conversion is part of the standard release load.

R5.0 CTL TO INTEGRATED CTL CONVERT KIT The Control to Integrated Control conversion kit is used to convert a Control card to an Integrated Control card, enabling the card to perform the PNNI and Call Processing functions provided by PNNI and CallP cards in a common Control mode system. The kit contains part number labels, password to enable the conversion and instructions for installation. The software required for the conversion is part of the standard release load.

R6.0 CTL TO INTEGRATED CTL CONVERT KIT The Control to Integrated Control conversion kit is used to convert a Control card to an Integrated Control card, enabling the card to perform the PNNI and Call Processing functions provided by PNNI and CallP cards in a common Control mode system. The kit contains part number labels, password to enable the conversion and instructions for installation. The software required for the conversion is part of the standard release load.

H/S PERIPHERAL SHELF FRONT COVER The High Speed Peripheral Shelf front cover is an optional assembly for the High Speed Peripheral Shelf (90-2291-01). It is required for European Union EMC Class B compliance. (Note that Class B compliance is normally required for locations which are other than telecommunications centre ; if the location is a telecommunications centre, then the HSPS front cover may not be required.) The H/S Peripheral Shelf front cover is field installable, and the kit consists of mounting brackets, shelf cover and instructions for installation. The cover is perforated to allow all LEDs to be visible through the perforations. Locking clips at the top of the cover allow the cover to be removed to enable access to the OC12 line cards and FICs.

DUAL E1 CARD 3 (75 OHM) This is the 75 ohm Dual E1 Card version 3. This card is backwards compatible with 90-0565-01 (Dual E1 2.048 Card)and 90-0568-01 (E1-75 OHM LIM MODULE). This card incorporates the LIMs on board so no external LIM is required. This card is designed to replace the existing Dual E1 card and has been designed to simplify ordering and sparing.

DUAL E1 CARD 3 (120 OHM) This is the 120 ohm Dual E1 Card version 3. This card is backwards compatible with 90-0565-08 (Dual E1 2.048 Card)and 90-0568-02 (E1-120 OHM LIM MODULE). This card incorporates the LIMs on board so no external LIM is required. This card is designed to replace the existing Dual E1 card and has been designed to simplify ordering and sparing.

DUAL E1 CARD 3 (120 OHM) G.703/G.704 This is the 120 ohm Dual E1 Card version 3. This card is backwards compatible with 90-0565-08 (Dual E1 2.048 Card)and 90-0568-02 (E1-120 OHM LIM MODULE). This card incorporates the LIMs on board so no external LIM is required. This card is designed to replace the existing Dual E1 card and has been designed to simplify ordering and sparing.

96M CTL. INTEG. CTL & ISC SANDISK This part is the NOR-based 96M SanDisk used in R4.2 (and lower) Control and Integrated CallP/PNNI cards, and in all IP Service cards. Permanently held at LA status. This kit can also be used to upgrade a 90-6184-01 ISC card to the 90-6184-12 ISC card level of functionality, and replaces the ISC Card upgrade kit, 90-7736-01.

96M CTL. INTEG. CTL & ISC SANDISK This part is the NOR-based 256M SanDisk used in R4.3 Control and Integrated CallP/PNNI cards. Permanently held at LA status.

96M CTL. INTEG. CTL & ISC SANDISK This part is the NAND-based 256M SanDisk used in R5.0 (and higher)Control and Integrated CallP/PNNI cards. Permanently held at LA status.

PWR SUPPLY ~230VAC 3600 Mainstreet AC Power Supply (87 to 264VAC). This part provides AC power for the 3600 Mainstreet system and requires a power tray (90-3669-11 single feed, or 90-3669-12 dual feed) to connect to the system. The power supply can be used in pairs in load sharing mode to provide redundant power. This power supply is designed to replace (90-2378-01).