SAFETY COVER FOR NEW FAN SHELF 19"

RING GENERATOR PSU The Ring Generator PSU is intended for use with the External Ring Generator assembly (90-5945-01), and 3600 system power trays (90-3669-xx). The Ring Generator PSU includes one ringing power supply unit (PSU) and grounding wire. There are some switches on the product to select; DC bias, and operation frequency (16Hz, 20Hz, or 25Hz). The External Ring Generator configuration requirements: dual output, redundant operation = 4 Ring Generator PSU; single output, redundant operation = 2 Ring Generator PSU; dual output, non-redundant operation = 2 Ring Generator PSU.

RING GENERATOR PSU The Ring Generator PSU is intended for use with the External Ring Generator assembly (90-5945-01), and 3600 system power trays (90-3669-xx). The Ring Generator PSU includes one ringing power supply unit (PSU) and grounding wire. There are some switches on the product to select; DC bias, and operation frequency (16Hz, 20Hz, or 25Hz). The External Ring Generator configuration requirements: dual output, redundant operation = 4 Ring Generator PSU; single output, redundant operation = 2 Ring Generator PSU; dual output, non-redundant operation = 2 Ring Generator PSU.

QUAD OC3/STM1 SFP UNI/NNI CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The quad OC3/STM1 UNI/NNI Card is a ATM interface card operating at the SONET/SDH OC3/STM1 rate of 155 Mbps per port. This card is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical or electrical physical interface and requires one or more of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP), 90-9764-03 (OC3/STM1 LR SFP) or 90-9764-04 (STM1 ELEC SFP). Note that the full set of SFP functions are only available in 7470 MSP R8.0-R9.1 or 7670 ESE R4.0-R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01 (SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE), 90-9771-03 (MULTIMODE LC TO SC CONVERSION CABLE), 90-9772-01 (BNC CONVERSION CABLE FOR ELEC SFP) or 90-9772-02 (SMZ CONVERSION CABLE FOR ELEC SFP).

Power supply shelf for OS6855-U10 and 6855-14 models; mounting brackets included

OS9000 bundle for PoE support.Bundle includes a Power Shelf (3.5 RU high) with 4 dedicated slots for OS9-IPS-600A PoE power supplies, 4 cables (49"" long) for connecting the shelf to the OS9000 chassis and 1 OS9-IPS-600A. This bundle is fully interchangeable with OS7-IP-SHELF.

OS-LS-6248P Chassis. Fast Ethernet L2+ stackable fixed configuration chassis in a 1U form factor consisting of 48 ports 10/100 RJ-45 ports with Power over Ethernet, two 10/100/1000 RJ-45 ports and two combo ports. Combo ports consist of two additional 10/100/1000 RJ-45 and two mini-GBIC ports. MiniGBIC ports support Gigabit or Fast Ethernet MiniGBIC (SFP) optical transceivers, which can be ordered separately. Stacking capability utilizes the two 10/100/1000 RJ-45 ports and standard Ethernet cabling. Optional backup power supported. Optional items can be purchased/ordered separately. Comes with 19" rack mounts, RJ-45 to DB-9 adaptor, and country specific power cord.

OS-LS-6248 Chassis. Fast Ethernet L2+ stackable fixed configuration chassis in a 1U form factor consisting of 48 ports 10/100 RJ-45 ports, two 10/100/1000 RJ-45 ports and two combo ports. Combo ports consist of two additional 10/100/1000 RJ-45 and two mini-GBIC ports. MiniGBIC ports support Gigabit or Fast Ethernet MiniGBIC (SFP) optical transceivers, which can be ordered separately. Stacking capability utilizes the two 10/100/1000 RJ-45 ports and standard Ethernet cabling. Optional backup power supported. Optional items can be purchased/ordered separately. Comes with 19" rack mounts, RJ-45 to DB-9 adaptor, and country specific power cord.

OS-LS-6224U Chassis. Fast Ethernet L2+ stackable fixed configuration chassis in a 1U form factor consisting of 24 ports 100Base-X SFP, two 10/100/1000 RJ-45 ports and two combo ports. Combo ports consist of two additional 10/100/1000 RJ-45 and two mini-GBIC ports. The 24 SFP ports accepts industry standard 100Base-X optical transceivers which are sold separately. MiniGBIC ports support Gigabit or 100FX Ethernet MiniGBIC (SFP) optical transceivers, which can be ordered separately. Stacking capability utilizes the two 10/100/1000 RJ-45 ports and standard Ethernet cabling. Optional backup power supported. Optional items can be purchased/ordered separately. Comes with 19" rack mounts, RJ-45 to DB-9 adaptor, and country specific power cord.

OS-LS-6224P Chassis. Fast Ethernet L2+ stackable fixed configuration chassis in a 1U form factor consisting of 24 ports 10/100 RJ-45 ports with Power over Ethernet, two 10/100/1000 RJ-45 ports and two combo ports. Combo ports consist of two additional 10/100/1000 RJ-45 and two mini-GBIC ports. MiniGBIC ports support Gigabit or Fast Ethernet MiniGBIC (SFP) optical transceivers, which can be ordered separately. Stacking capability utilizes the two 10/100/1000 RJ-45 ports and standard Ethernet cabling. Optional backup power supported. Optional items can be purchased/ordered separately. Comes with 19" rack mounts, RJ-45 to DB-9 adaptor, and country specific power cord.

OS-LS-6224 Chassis. Fast Ethernet L2+ stackable fixed configuration chassis in a 1U form factor consisting of 24 ports 10/100 RJ-45 ports, two 10/100/1000 RJ-45 ports and two combo ports. Combo ports consist of two additional 10/100/1000 RJ-45 and two mini-GBIC ports. MiniGBIC ports support Gigabit or Fast Ethernet MiniGBIC (SFP) optical transceivers, which can be ordered separately. Stacking capability utilizes the two 10/100/1000 RJ-45 ports and standard Ethernet cabling. Optional backup power supported. Optional items can be purchased/ordered separately. Comes with 19" rack mounts, RJ-45 to DB-9 adaptor, and country specific power cord.

OS-LS-6212P Chassis. Fast Ethernet L2+ stackable fixed configuration chassis in a 1U form factor consisting of 12 ports 10/100 RJ-45 ports with Power over Ethernet, two 10/100/1000 RJ-45 ports and two combo ports. Combo ports consist of two additional 10/100/1000 RJ-45 and two mini-GBIC ports. MiniGBIC ports support Gigabit or Fast Ethernet MiniGBIC (SFP) optical transceivers, which can be ordered separately. Stacking capability utilizes the two 10/100/1000 RJ-45 ports and standard Ethernet cabling. Optional backup power supported. Optional items can be purchased/ordered separately. Comes with 19" rack mounts, RJ-45 to DB-9 adaptor, and country specific power cord.

OS-LS-6212 Chassis. Fast Ethernet L2+ stackable fixed configuration chassis in a 1U form factor consisting of 12 ports 10/100 RJ-45 ports, two 10/100/1000 RJ-45 ports and two combo ports. Combo ports consist of two additional 10/100/1000 RJ-45 and two mini-GBIC ports. MiniGBIC ports support Gigabit or Fast Ethernet MiniGBIC (SFP) optical transceivers, which can be ordered separately. Stacking capability utilizes the two 10/100/1000 RJ-45 ports and standard Ethernet cabling. Optional backup power supported. Optional items can be purchased/ordered separately. Comes with 19" rack mounts, RJ-45 to DB-9 adaptor, and country specific power cord.

OC3-2M SFP W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The OC3-2M SFP UNI/NNI Card with CPU-2 is an ATM interface card operating at the SONET OC3 rate of 155 Mbps, with 32k cell buffering per card. The OC3-2M SFP is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). The card is shipped without the optical physical interface and requires one of the following parts to be installed before the card is functional: 90-9764-01 (OC3/STM1 MMF SFP), 90-9764-02 (OC3/STM1 IR SFP) or 90-9764-03 (OC3/STM1 LR SFP). Note that the full set of SFP functions are only available in 7470 MSP R9.1 or 7670 ESE R5.1; in earlier releases the cards operate in 'transparency mode' and do not have access to the full set of SFP functions. One of the following adaptor cables must also be ordered, depending on the physical connector type required: 90-9771-01 (SINGLE MODE LC TO SC CONVERSION CABLE), 90-9771-02 (SINGLE MODE LC TO FC CONVERSION CABLE) or 90-9771-03 (MULTIMODE LC TO SC CONVERSION CABLE). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module(eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on the 7670 ESE shelf. Note that only the eTM is supported for traffic shaping on the ESE. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label

MRD MODULE Single manual ringdown module for end-to-end network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -15DB; module operates as end station interface using manually controlled ringing.

LGS MODULE (0/-7DB) Single FXS(LGS) module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -7DB; module operates as FXS or PLAR circuit.

LGE MODULE (+4/-10DB) Single FXO (LGE) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10 DB for receive and +3 to -4 DB for transmit; module operates as FXO or DPT circuits. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

ISDN CABLE This cable assembly is used to connect 90-9244-01 DUAL E1 CARD 3 (75 OHM), and 90-9244-02 DUAL E1 CARD 3 (120 OHM) with the distribution panel. The part number for the distribution panel is; 90-2635-02 DUAL E1 CARD 3 DISTRIBUTION PANEL. The cable and distribution panel together provide a means to connect the Dual E1 card circuits to external equipment.

INTERNAL RING GENERATOR CBL KIT This cable kit is required when connecting 90-5946-01 (Ring Generator PSU) internally in a MainStreet Power Tray (90-3669-xx). This kit is intended for the following revisions of power tray; 90-3669-03/K, 90-3669-11/B and 90-3669-12/B. The MainStreet power tray has been updated to incorporate new functionality and the new cable kit is required.

H/S PERIPHERAL SHELF FRONT COVER The High Speed Peripheral Shelf front cover is an optional assembly for the High Speed Peripheral Shelf (90-2291-01). It is required for European Union EMC Class B compliance. (Note that Class B compliance is normally required for locations which are other than telecommunications centre ; if the location is a telecommunications centre, then the HSPS front cover may not be required.) The H/S Peripheral Shelf front cover is field installable, and the kit consists of mounting brackets, shelf cover and instructions for installation. The cover is perforated to allow all LEDs to be visible through the perforations. Locking clips at the top of the cover allow the cover to be removed to enable access to the OC12 line cards and FICs.