V.35 MODULE clei Single V.35 module providing for a single V.35 compatible interface (DTE or DCE) per module. Three control leads are supported; DCD/RTS/ALB when configured as DCE. These modules cannot be used to derive a clock for system synchronization. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

.19 UDP RM BRKT Mounting bracket used for mounting two 3620 Distribution Panels (90-2255-01) or two 3612/24 Base Distribution Panels (90-2256-01) or one 3630 Base Distribution Panel (90-2257-01) into a 19 rackmount c onfiguration. Personality modules and Base Distribution Panels ordered separately.

1.544 MBPS T1 CARD This product is used with the 3600 Mainstreet. Provides a single T1 interface conforming to PUB 43801 and 62411. Requires LIM Module (90-0567-01) for DSX-1 interface or CSU module (90-0161-02) for direct connection to T1 circuit. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

1.544 T1 MBPS CARD clei This product is used with the 3600 Mainstreet. Provides a single T1 interface conforming to PUB 43801 and 62411. Requires LIM Module (90-0567-01) for DSX-1 interface or CSU module (90-0161-02) for direct connection to T1 circuit. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

1.6G DUAL HUB-2 clei The 7470 1.6G Dual Hub Card 2 is common equipment card for the Peripheral Shelf Cardfile. The Dual Hub card handles two bi-directional 800M ISL links: ISL Port#1 supports UCS 1-6 and ISL Port#2 supports UCS 7-12. Two Dual Hub Cards are required perperipheral shelf (for fabric redundancy) in multi-shelf systems. The 1.6G Dual Hub 2 is delivered with R4.2 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

1.6G DUAL HUB-2 clei The 7470 1.6G Dual Hub Card 2 is common equipment card for the Peripheral Shelf Cardfile. The Dual Hub card handles two bi-directional 800M ISL links: ISL Port#1 supports UCS 1-6 and ISL Port#2 supports UCS 7-12. Two Dual Hub Cards are required perperipheral shelf (for fabric redundancy) in multi-shelf systems.

10-DP-1 SINGLE TLC Oneac Part Number: Order by Description. The 10-DP-1 Single Series provides lightning protection for 1 two wire copper circuit. The Oneac single way lightning protector is designed for use with Krone 237A (90-0080-01/02). To be used in conjunction with the Ground Bar Kit (90-3061-01). NOTE: Lightning protection is strongly recommended in use with the LIM Module (HDSL) (90-2380-01/02).

100/120V TO 48 VDC UPG KIT A single 1100W 100/120 VAC nominal to 48 VDC rectifier with p ower cord. This rectifier plugs into the 7470 100/120 VAC to 48 VDC Rectifier rack (90-2843-01).

100/120V TO 48VDC RECTIFIER Rack containing one 1100W, 100/120 VAC nominal to 48 VDC rectifier with mounting hardware, power cord and termination hardware for two rectifiers, as the rack can accomodate two rectifiers for a redundant configuration. A second rectifier is available by ordering an upgrade kit (90-2843-02). The rectifier rack is 3 rack units tall (5.25 ) and fits a standard 19 rack.

1082 DATA CONTROLER

10BASE2 TRANSCEIVER KIT

10BT HUB CABLE

16 PORT E1 FR -120 OHM R4.3 This card provides sixteen Frame Relay Interface ports that are E1 compatible. Each port may be configured for channelized, unchannelized, or unframed operation. It can be used with distribution panels 90-6398-01, 90-2543-01, or 90-8307-01. This card is delivered with R4.3 software.

16 PORT E1 FR -120 OHM R5.0 This card provides sixteen Frame Relay Interface ports that are E1 compatible. Each port may be configured for channelized, unchannelized, or unframed operation. It can be used with distribution panels 90-6398-01, 90-2543-01, or 90-8307-01. This card is delivered with R5.0 software.

16 PORT E1 FR CARD - 120 OHM This card provides sixteen Frame Relay Interface ports that are E1 compatible. Each port may be configured for channelized, unchannelized or unframed operation. It can be used with distribution panels 90-6398-01, 90-2543-01, or 90-8307-01.

16 PORT T1 FR -100 OHM clei This card provides sixteen Frame Relay Interface ports that are DS1 compatible. Each port may be configured for channelized, unchannelized, or unframed operaton. It can be used with distribution panels 90-2543-01, or 90-8307-01.

16 PORT T1 FR -100 OHM R4.3 clei This card provides sixteen Frame Relay Interface ports that are DS1 compatible. Each port may be configured for channelized, unchannelized, or unframed operaton. It can be used with distribution panels 90-2543-01, or 90-8307-01. This card is delivered with R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

16 PORT T1 FR -100 OHM R5.0 clei This card provides sixteen Frame Relay Interface ports that are DS1 compatible. Each port may be configured for channelized, unchannelized, or unframed operaton. It can be used with distribution panels 90-2543-01, or 90-8307-01. This card is delivered with R5.0 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

19 UDP RM BRKT Mounting bracket used for mounting two 3620 Distribution Panels (90-2255-01) or two 3612/24 Base Distribution Panels (90-2256-01) or one 3630 Base Distribution Panel (90-2257-01) into a 19 rackmount c onfiguration. Personality modules and Base Distribution Panels ordered separately.

19IN KRONE SUBRACK