MAU 2 COAX ADAPTOR The Coax Adaptor provides two coaxial connectors for the OC3 and STM1 Electrical Interface Cards. The Coax Adaptor attaches to the rear I/O connectors of the Peripheral Shelf.

MAU 6 COAX ADAPTOR The Coax Adaptor provides six coaxial connectors for the Triple DS3 and Triple E3 Interface Cards. The Coax Adaptor attaches to the rear I/O connectors of the Peripheral Shelf.

MAU 8/16 PORT PRI WIRE WRAP clei The PRI Wire Wrap MAU provides a wire wrap connector (66 posts) for the 16 port T1/E1 FR and 8 port T1/E1 CR and CE cards. It attaches to the rear I/O connectors of the 7670 ESE (2 AMP/CHAMP 64 posts). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label. As of August 1, 2007 the WW MAU can not be sold in countries which require compliance to EN55022:1998 or CISPR22:1997 as these specifications include requirements for conducted emissions on telecommunication ports.

MAU Ethernet 10 Base-T The 10 Base-T Ethernet MAU provides an RJ45 8 position modular connector for the Service Card, providing access to the card's Ethernet port. The 10BaseT MAU attaches to the rear I/O connectors of the Peripheral Shelf.

MAU T1/E1 AMP/CHAMP The T1/E1 AMP/CHAMP MAU provides a 50 pin connector for the 7470 multi-port T1/E1 cards. It attaches to the rear I/O connectors of the Peripheral Shelf.

MAU T1/E1 WIRE WRAP The T1/E1 Wire Wrap MAU provides a wire wrap connector for the 7470 multi-port T1/E1 cards. It attaches to the rear I/O connectors of the Peripheral Shelf. As of August 1 2007 the WW MAU can not be sold in countries which require compliance to EN55022:1998 or CISPR22:1997 as these specifications include requirements for conducted emissions on telecommunication ports. The recommended replacement part is the AMP Champ MAU: 90-2542-01 MAU, T1/E1I AMP/CHAMP and 90-2542-04 MAU, T1/E1 AMP/CHAMP.

MAU TO PANEL CABLE DS3 E3 MAU TO PANEL CABLE. This cable is used to connect the 7470 DS3/E3 switching MAU to a protection panel. It is used on the 7470 for 1:N protection of the single port DS3 or single port E3 cards. It is used in conjunction with the 90-4919-01 switching MAU and the 90-4918-01 DS3 protection panel.

MID MOUNT BRACKET 13VU This is a mid mounting bracket assembly for the 13VU 7470 Shelves. This package is only for use with the Switching Shelf (90-2181-01), High Speed Peripheral Shelf (90-2291-01), and the Peripheral Shelf (90-4907-01). This package consists of cable management troughs, and 19 - 23 rack adapters.

MULTI MODE SC-SC FIBER - 4P OC3/STM1 MMF This cable is used to connect the quad OC3/STM1 MMF optical CR card to a patch panel. It consists of a 8-fibre bundle (4 Tx and 4 Rx) of SC/SC multi-mode fibres. Individual SC to SC duplex (Rx-Tx) fibres may be used instead of this part. Approximate length: 10 feet.

MULTIMODE LC TO SC CONVERSION CABLE A 1 meter duplex multimode LC to SC conversion cable. . Used with the Quad OC3/STM1 SFP Cell Relay card or the OC3/STM1 Working I/O (90-9785-02) to adapt the SFP connector to existing cable connectors.

NEW NODE 7470 R7.0 S/W RTU WITH CD This Right to Use (RTU) licence entitles customers to run Release 7.0 in one new 7470 MSP node. This part must be purchased at the same time(same PO) as the new node (including at least 1 control card and shelf). Quantity 1 of the RTU licence is needed for 1 node (not per control card). This part includes a software CD containing the 7470 MSP R7.0 software

NEW NODE 7470 R8.0 S/W RTU WITH CD This Right to Use (RTU) licence entitles customers to run Release 8.0 in one new 7470 MSP node. This part must be purchased at the same time(same PO) as the new node (including at least 1 control card and shelf). Quantity 1 of the RTU licence is needed for 1 node (not per control card). This part includes a software CD containing the 7470 MSP R8.0 software

NEW NODE 7470 R9.x S/W RTU WITH CD This Right to Use (RTU) licence entitles customers to run Release 9.x in one new 7470 MSP node. This part must be purchased at the same time(same PO) as the new node(including at least 1 control card and shelf). Quantity 1 of the RTU licence is needed for 1 node (not per control card). This part includes a software CD containing the 7470 MSP R9.x software.

OC3/STM1 IR SFP clei 1-port OC-3/STM-1 SONET/SDH Optics Module, IR-1 / I-1, 1310 nm, LC Connector. Can be used in the Quad OC3/STM1 SFP Cell Relay card (90-8687-25) or OC3/STM1 1:N Working I/O (90-9785-02) (in ESE R5.X) or OC3/STM1 1:N Protecting I/O (90-9785-03) (in ESE R5.X). This unit is equipped with a Class 1 laser.

OC3/STM1 LR SFP clei 1-port OC-3/STM-1 SONET/SDH Optics Module, LR-1 / L-1.1, 1310 nm, LC Connector. Can be used in the Quad OC3/STM1 SFP Cell Relay card (90-8687-25) or OC3/STM1 1:N Working I/O (90-9785-02) (in ESE R5.X) or OC3/STM1 1:N Protecting I/O (90-9785-03) (in ESE R5.X). This unit is equipped with a Class 1 laser.

OC3/STM1 MMF SFP clei 1-port OC-3/STM-1 SONET/SDH Optics Module, MM, 1310 nm, LC Connector. Can be used in the Quad OC3/STM1 SFP Cell Relay card (90-8687-25) or OC3/STM1 1:N Working I/O (90-9785-02) (in ESE R5.X) or OC3/STM1 1:N Protecting I/O (90-9785-03) (in ESE R5.X). This unit is equipped with a Class 1 laser.

OCTAL E1-2 PRI CR W/CPU-2 120 OHM This 120 Ohm card utilizes the CPU-2 and provides eight E1 ports for Cell Relay (ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01)to provide up to four groups of ATM Inverse Muliplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU(90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01) per card.

OCTAL T1-2 PRI CR W/CPU-2 100 OHM clei This card utilizes the CPU-2 and provides eight T1 ports for Cell Relay(ATM) services on the 7470, with 32k cell buffering per card and advanced traffic management capability. This card allows an optional upgrade module (90-4672-01) to provide up to four groups of ATM Inverse Multiplexing. Physical connection via RJ-45, wire-wrap, or standard 50-pin Telco connector can be supported. RJ-45 connection requires a PRI RJ-45 Distribution Panel (90-2543-01) and associated 8-port cable (90-2767-xx) for each card. Wire-wrap connection requires one wire-wrap MAU (90-2542-02) per card and the 50-pin connector requires one Telco MAU (90-2542-01)per card.

PERIPHERAL SHELF 2 clei The Peripheral Shelf Cardfile is a 19 rackmount shelf which has 12 universal card slots (UCS) and 2 common equipment card slots (X and Y). The X (and Y if redundant fabric is required) common equipment card slot is equipped with a Dual Hub or SHUB Card. The 12 UCSs are equipped with 0, 1, or 2 Control Cards and up to 10, 11, or 12 interface cards depending on the number of Control Cards installed. One Control Card is installed for non-redundant control, two for control redundancy, and zero if Control Cards have already been installed in another Peripheral Shelf of the 7470 system. A 7470 system can be equipped with up to 8 Peripheral Shelf Cardfiles for a total of 96 UCS's. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

QUAD 10/100BASE-T ETHERNET W/O MAU clei Four port 10/100 Base-T Ethernet card for 7470. This card requires MAU 90-8017-01 (4 port 10BaseT/100BaseTX Electrical Interface MAU).