IMM - 7750 SR 48-PT GE - SFP 7750 SR 48-port GE MDA will provide 48 physical ports that accept (48) SFP pluggable optic modules. NOTE - When installing and using an IMM, impedance panels are required to be installed in all unpopulated IOM slots. Impedance panel order numbers are: 3HE04147AA - ACC - 7750 SR IMP PNL - 1 or 3HE04148AA - ACC - 7750 SR IMP PNL - 5

IMM - 7750 SR 8-PT 10GE - XFP 7750 SR 8-port 10GE MDA will provide 8 physical ports that accept (8) XFP pluggable optic modules. NOTE - When installing and using an IMM, impedance panels are required to be installed in all unpopulated IOM slots. Impedance panel order numbers are: 3HE04147AA - ACC - 7750 SR IMP PNL - 1 or 3HE04148AA - ACC - 7750 SR IMP PNL - 5

Indoor Shelf 4-slot

Indoor Shelf 8-slot

INDOOR/OUTDOOR CABLE GROUNDING KIT

INST. KIT 1660SM SUBRACK WITH FANS

INSTALLATION TOOL KIT

INTEG CALLP/PNNI CARD-2 R4.3 This card provides the functionality of a R4.3 Control Card-2, a R4.3 CallP Cad-2 and a R4.3 PNNI Card-2, all combined on a single card. One card is required for non-redundant operation, and two cards for redundancy per 36170 system. This card must be installed in Contron Card slots only, and cannot be used in systems that have also been configured with CallP-2 Cards or PNNI-2 Routing cards. Node management, alarm, and timing terminations required a control card interconnect panel (CCIP). One CCIP serves both active and redundant integrated control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R4.3 software. Note that this card uses the Processor Module, and that the enhanced Processor Module (ePM) is required to upgrade to R5.0. Consequently, it is recommended that 90-6226-07 or 90-6226-09 be used instead of this part.

INTEG CALLP/PNNI CARD-2 W/ EPM R4.3 clei This card provides the functionality of a R4.3 Control Card, a R4.3 CallP Card-2 and a R4.3 PNNI Card-2, all combined on a single card. One card is required for non-redundant operation, and two cards for redundancy per 7470 system. This card must be installed in Control Card slots only, and cannot be used in systems that have been configured with CallP-2 Cards or PNNI-2 Routing cards. Node management, alarm, and timing terminations require a control card interconnect panel (CCIP). One CCIP serves both active and redundant integrated control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R4.3 software, and with an enhanced Processor Module (ePM), and with a NAND-based 256MB memory card. Note that previous to this note, all control cards were shipped wih NOR-based memory cards. The software loadset required for this card is documented in Field Notice FN1867. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

INTEG CALLP/PNNI CARD-2 W/ EPM R5.0 This card provides the functionality of a Control Card, a CallP Card-2 and a PNNI Card-2, all combined on a single card. Two cardsare required for redundancy per 7470 system. This card must be installed in Control Card slots only, and cannot be used in systems that have been configured with CallP-2 Cards or PNNI-2 Routing cards. Node management, alarm, and timing terminations require a control card interconnect panel (CCIP). One CCIP serves both active and redundant integrated control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R5.0 software, a larger SanDisk and with an enhanced Processor Module (ePM).

INTEG CALLP/PNNI CARD-2 WITH EPM clei INTEG CALLP/PNNI CARD-2 WITH EPM

INTEG CALLP/PNNI CARD-2 WITH EPM clei This card provides the functionality of a Control Card, a CallP Card-2 and a PNNI Card-2, all combined on a single card. Two cardsare required for redundancy per 7470 system. This card must be installed in Control Card slots only, and cannot be used in systems that have been configured with CallP-2 Cards or PNNI-2 Routing cards. Node management, alarm, and timing terminations require a control card interconnect panel (CCIP). One CCIP serves both active and redundant integrated control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R6.0 software, a larger SanDisk and with an enhanced Processor Module (ePM).

INTEG CALLP/PNNI/SPOOLING CARD-2 R5.0 This card provides the functionality of a Control Card-2, a CallP Card-2, a PNNI Card-2, and a Data Spooling-2 card, all combined on a single card. Two cards are required for redundancy per 7470 system. This card must be installed in Control CArd slots only, and cannot be used in systems that have also been configued with CallP-2 Cards or PNNI-2 Routing cards. Node management, alarm, and timing terminations required a control card interconnect panel (CCIP). One CCIP serves both active and redundant integrated control cards. There are two variants of CCIP for US Telco (90-2295-x1) and Internatinal (90-2295-x2) requirements. This card is delivered with R4.3 R5.0 software, a larger SanDisk and with an enhanced Processor Module (ePM).

INTEG CALLP/PNNI/SPOOLING CARD-2 W/EPM INTEG CALLP/PNNI/SPOOLING CARD-2 W/EPM

INV MULTIPLEX CARD IMC This assembly is a UCS resource card for inverse multiplexing applications. Based on the Bonding standard, the application supports n*64Kbit/s and n*56Kbit/s channels where n=15 for mode 1 and n=14 for mode 3 between 3600/45/64 nodes. Each IMC supports a total of 30 network-sidechannels (includes mode 3 monitor channels). Supoorted by Generic 1116 or greater.

IOM - 7450 ESS IOM3-XP 7450 ESS 50G Input/Output Module 3-XP (IOM3-XP) Baseboard. Accepts up to 2 MDA-XPs or MDAs (Please consult release notes for supported MDAs) NOTE - When installing and using an IOM3-XP, impedance panels are required to be installed in all unpopulated IOM slots. Impedance panel order numbers are: 3HE04149AA - ACC - 7450 SR IMP PNL - 1 or 3HE04150AA - ACC - 7450 SR IMP PNL - 5

IOM - 7450 ESS-6/7/12 IOM-10G 7450 ESS 10 Gbps Input Output Module(IOM) Baseboard. Accepts up to 2 Ethernet Media Dependent Adapters(MDAs)

IOM - 7450 ESS-6/7/12 IOM-20G 7450 ESS 20 Gbps Input Output Module(IOM) Baseboard. Accepts up to 2 Media Dependent Adapters (MDAs)

IOM - 7750 SR IOM3-XP 7750 SR 50G Input/Output Module 3-XP (IOM3-XP) Baseboard. Accepts up to 2 MDA-XPs or MDAs (Please consult release notes for supported MDAs). NOTE - When installing and using an IOM3-XP, impedance panels are required to be installed in all unpopulated IOM slots. Impedance panel order numbers are: 3HE04147AA - ACC - 7750 SR IMP PNL - 1 or 3HE04148AA - ACC - 7750 SR IMP PNL - 5

IOM - 7750 SR-7/12 IOM-20G 7750 SR 20G Input Output Module (IOM) Baseboard, accepts up to 2 Media Dependent Adapters (MDAs)