QUAD STM1 ELEC UNI/NNI clei See PDN 16127. The quad OC3/STM1 Electrical UNI/NNI Card is a ATM interface card operating at the SONET OC3 rate of 155 Mbps per port. The electrical interface is dual coaxial BNC connectors, with a range of 450 feet. The line code is code mark inversion (CMI). The quad OC3 card is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is also supported in ESE R2.0.

QUAD STM1 ELEC UNI/NNI clei The quad OC3/STM1 Electrical UNI/NNI Card is a ATM interface card operating at the SONET OC3 rate of 155 Mbps per port. The electrical interface is dual coaxial BNC connectors, with a range of 450 feet. The line code is code mark inversion (CMI). The quad OC3 card is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is also supported in ESE R2.0. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

QUAD STM1 ELEC UNI/NNI clei The quad OC3/STM1 Electrical UNI/NNI Card is a ATM interface card operating at the SONET OC3 rate of 155 Mbps per port. The electrical interface is dual coaxial BNC connectors, with a range of 450 feet. The line code is code mark inversion (CMI). The quad OC3 card is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is also supported in ESE R2.0.

R4.3 CTL & INTEG. CALLP/PNNI UPGRADE KIT This kit is used to upgrade an R4.3 Control or Integrated CallP/PNNI card to the enhanced Processor Module(ePM) and larger NOR Based (256M) memory card. Factory shipments of R4.3 Control and Integrated CallP/PNNI cards ship with the ePM installed, and with the larger memory card included, and do not require this upgrade kit. The kit contains an ePM (333 MHz PowerPC 755 module with 512M RAM), 256M memory card, part number labels, and instructions for installation. Note: The NOR-Based memory card is replaced by a NAND-based memory card for later loadsets of R4.3. Be aware that this part supplies the older NOR based memory card and that you should check with Product Management before ordering this part. Field Notice FN1867 provides more details.

R4.3 CTL TO INTEGRATED CTL CONVERT KIT The Control to Integrated Control conversion kit is used to convert a Control card to an Integrated Control card, enabling the card to perform the PNNI and Call Processing functions provided by PNNI and CallP cards in a common Control mode system. The kit contains part number labels, password to enable the conversion and instructions for installation. The software required for the conversion is part of the standard release load.

R5.0 CTL & INTEG. CALLP/PNNI UPGRADE KIT This kit is used to upgrade an R5.0(or higher) Control or Integrated CallP/PNNI card to the enhanced Processor Module(ePM) and larger(256M) SanDisk. Factory shipments of R5.0 Control and Integrated CallP/PNNI cards ship with the ePM installed, and with the larger SanDisk included, and do not require this upgrade kit. The kit contains an ePM (333 MHz PowerPC 755 module with 512M RAM), 256M SanDisk, part number labels and instructions for installation.

R5.0 CTL TO INTEGRATED CTL CONVERT KIT The Control to Integrated Control conversion kit is used to convert a Control card to an Integrated Control card, enabling the card to perform the PNNI and Call Processing functions provided by PNNI and CallP cards in a common Control mode system. The kit contains part number labels, password to enable the conversion and instructions for installation. The software required for the conversion is part of the standard release load.

R5.0 SERVICE CARD-2 UPGRADE KIT This kit is used to upgrade an R5.0(or higher) Service Card-2 (CallP,PNNI or Data Spooling card) to the enhanced Processor Module (ePM). Factory shipments of R5.0 Service Card-2 and higher cards ship with the ePM installed and do not require this upgrade kit. The kit contains an ePM(333 MHz PowerPC 755 module with 512M RAM), part number labels and instructions for installation.

R6.0 CTL TO INTEGRATED CTL CONVERT KIT The Control to Integrated Control conversion kit is used to convert a Control card to an Integrated Control card, enabling the card to perform the PNNI and Call Processing functions provided by PNNI and CallP cards in a common Control mode system. The kit contains part number labels, password to enable the conversion and instructions for installation. The software required for the conversion is part of the standard release load.

RAC40 IF interco 35mm stacked RAC40

Radio Access unit

Radio Access unit enhanced

REC - ESS/SR-12 VAL AC BNDL - INTL Valere AC Power Bundle for the SR-12/ESS-12, redundant AC power for SR-12/ESS-12 with AC un-split shelf, supplies, status cable, DC lugs and blunt-cut AC International power cords, user must supply DC power cables, chassis lugs and AC wall connectors, INCLUDES: 3HE04172AA (2), 3HE02787AA (8), 3HE04173AA (2), 3HE02946AA (8)

REC - ESS/SR-12 VAL AC BNDL - INTL Valere AC Power Bundle for the SR-12/ESS-12, redundant AC power for SR-12/ESS-12 with AC un-split shelf, supplies, status cable, DC lugs and blunt-cut AC International power cords, user must supply DC power cables, chassis lugs and AC wall connectors, INCLUDES: 3HE04172AA (2), 3HE02787AA (8), 3HE04173AA (2), 3HE02946AA (8)

REC - ESS/SR-12 VAL AC UN-SPLIT SHELF Valere AC Un-Split Power Shelf for the SR/ESS-12, one (1) required for AC operation of Alcatel-Lucent SR-12 & ESS-12 chassis. Shelf is un-split with two (4) power outputs for 1+1 redundancy. Accepts of up to four (4) SR/ESS 2500W AC Power Supplies and/or SR/ESS AC Un-Split Power Shelf Blanks (all sold separately). Includes four (4) power lugs for the supply cables from the Power Shelf. SR-12/ESS-12 Status Cable ecommended (sold separately). Export_Control_Class: Not Applicable

REC - ESS/SR-12 VAL AC UN-SPLIT SHELF Valere AC Un-Split Power Shelf for the SR/ESS-12, one (1) required for AC operation of Alcatel-Lucent SR-12 & ESS-12 chassis. Shelf is un-split with two (4) power outputs for 1+1 redundancy. Accepts of up to four (4) SR/ESS 2500W AC Power Supplies and/or SR/ESS AC Un-Split Power Shelf Blanks (all sold separately). Includes four (4) power lugs for the supply cables from the Power Shelf. SR-12/ESS-12 Status Cable ecommended (sold separately). Export_Control_Class: Not Applicable

REC - SR/ESS AC PWR SHELF BLANKS SR/ESS AC Split Power Shelf Slot Blanks, one (1) blank recommended for each unoccupied power supply position in the SR/ESS AC Split Power Shelf

REC - SR/ESS AC PWR SHELF BLANKS SR/ESS AC Split Power Shelf Slot Blanks, one (1) blank recommended for each unoccupied power supply position in the SR/ESS AC Split Power Shelf

REC - SR/ESS VAL 2.5KW AC PW SUP Valere 2500 Watt AC Power Supply for the Valere AC Split Power Shelf. For 1 + 1 redundancy for the SR-12/ESS-12, four (4) supplies required. For 1+ 1 Redundancy on the ESS-6: two (2) supplies required and two SR/ESS AC Split Power Shelf Blanks (recommended) (sold separately). One (1) SR/ESS 2500W AC Power Supply Cord required for each Power Supply (sold separately).

REC - SR/ESS VAL 2.5KW AC PW SUP Valere 2500 Watt AC Power Supply for the Valere AC Split Power Shelf. For 1 + 1 redundancy for the SR-12/ESS-12, four (4) supplies required. For 1+ 1 Redundancy on the ESS-6: two (2) supplies required and two SR/ESS AC Split Power Shelf Blanks (recommended) (sold separately). One (1) SR/ESS 2500W AC Power Supply Cord required for each Power Supply (sold separately).