SS-4.1

SS-4.1

SS-4.1

STATION TOOL KIT

STM-1 PORT SFP

STM1 ELEC SFP 1-port STM-1 SDH Electrical Module, 1.0/2.3 Coaxial Connector (Type A Coupling). Can be used in the Quad OC3/STM1 SFP Cell Relay card (90-8687-25) or OC3/STM1 1:N Working I/O (90-9785-02) (in ESE R5.X) or OC3/STM1 1:N Protecting I/O (90-9785-03) (in ESE R5.X).

STM1-2M CR MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R4.3 S/W.

STM1-2M CR MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.

STM1-2M CR MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification(Version 3.1) and the ATM Forum B-ICI Specification(Version 2.0). Requires a minimum of Release 4.2 for operational support. This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM,90-7695-01) which, when installed, provides enchanced traffic management features. This card variant is shipped with R5.0 software. Note that only the eTM is supported for traffic shaping on the ESE. MD EFFECTIVITY DATE = AUGUST 1, 2004 AS PER PDN 9199.

STM1-2M EL W/CPU-2 (MAU EXCLUDED) The R5.0 STM1-2 Electrical Interface Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The electrical interface is dual coaxial BNC connectors. The line code is code mark inversion (CMI). The STM1-2 Electrical Interface is a single port card compliant to the requirements of the ATM Forum UNI Specifications (Version 3.1) and the ATM Forum B-ICI Specifications (Version 2.0). Requires a minimum of R elease 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card requires MAU 90-2322-01 for deployment in 7470 PS-2 shelf or MAU 90-8180-01 for deployment in 7670 ESE shelf. The 90-2322-01 and 90-8180-01 MAUs are not shipped with the STM1-2 card and each must be ordered separately. The STM1-2 Electrical Interface card with CPU-

STM1-2M EL W/CPU-2 (MAU EXCLUDED) The R5.0 STM1-2 Electrical Interface Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The electrical interface is dual coaxial BNC connectors. The line code is code mark inversion (CMI). The STM1-2 Electrical Interface is a single port card compliant to the requirements of the ATM Forum UNI Specifications (Version 3.1) and the ATM Forum B-ICI Specifications (Version 2.0). Requires a minimum of R elease 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card requires MAU 90-2322-01 for deployment in 7470 PS-2 shelf or MAU 90-8180-01 for deployment in 7670 ESE shelf. The 90-2322-01 and 90-8180-01 MAUs are not shipped with the STM1-2 card and each must be ordered separately.

STM1-2M EL W/CPU-2 R4.3 The STM1-2 Electrical Interface Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The electrical interface is dual coaxial BNC connectors. The line code is code mark inversion (CMI). The STM1-2 Electrical Interface is a single port card compliant to the requirements of the ATM Forum UNI Specifications (Version 3.1) and the ATM Forum B-ICI Specifications (Version 2.0). Requires a minimum of Release 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) which, when installed, provides enhanced traffic management features. Each STM1-2 Electrical Interface is shipped with a MAU 2 Coax Adapter (90-2322-x1). This card variant is shipped with R4.3 S/W.

STM1-2M IR W/CPU-2 The STM1-2M IR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach (IR) single mode fiber optical interface has a total loss budget of 12 db. The STM1-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R4.3 S/W.

STM1-2M IR W/CPU-2 The STM1-2M IR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach (IR) single mode fiber optical interface has a total loss budget of 12 db. The STM1-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.

STM1-2M IR W/CPU-2 The STM1-2M IR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Intermediate Reach (IR) single mode fiber optical interface has a total loss budget of 12 db. The STM1-2M IR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enhanced traffic management features. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.

STM1-2M LR W/CPU-2 The STM1-2M LR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical interface has a total loss budget of 28 db. The STM1-2M LR is single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which when installed, provides enhanced traffic management features. This card variant is shipped with R4.3 S/W.

STM1-2M LR W/CPU-2 The STM1-2M LR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical interface has a total loss budget of 28 db. The STM1-2M LR is single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which when installed, provides enhanced traffic management features. This card variant is shipped with R5.0 S/W. This card is also supported on R2.0 7670 ESE. On the ESE shelf only the eTM is supported for traffic shaping.

STM1-2M LR W/CPU-2 The STM1-2M LR UNI/NNI Card with CPU-2 is both a UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The Long Reach (LR) single mode fiber optical interface has a total loss budget of 28 db. The STM1-2M LR is single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which when installed, provides enhanced traffic management features. This card is also supported on R2.0 7670 ESE. On the ESE shelf only the eTM is supported for traffic shaping.

STM1-2M MMF W/CPU-2 The STM1-2M MMF Card with CPU-2 is a local ATM (LATM) STM1 interface card operating at the SDH STM1 rate of 155 Mbps, with 32k cell buffering per card. The multi-mode fiber (MMF) optional interface has a typical range of 2km. The STM1-2M MMF Card is a single port card and is compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). This card is designed to accept the optional Multi-Service Traffic Module (MSTM, 90-4724-01) or enhanced Traffic Shaping Module (eTM, 90-7695-01) which, when installed, provides enchanced traffic management features. This card is also supported on R2.0 of the 7670 ESE. Note that only the eTM is supported for traffic shaping on the ESE.

STM1-2M XLR W/CPU-2 The STM1-2 XLR UNI/NNI Card with CPU-2 is a both UNI and NNI STM1 ATM interface card operating at the SONET STM1 rate of 155 Mbps, with 32k cell buffering per card. The transmit and receive wavelength of the XLR card is 1550 nm and supports up to 110 Km of fiber. The STM1-2 32K XLR is a single port card compliant to the requirements of the ATM Forum UNI Specification (Version 3.1) and the ATM Forum B-ICI Specification (Version 2.0). Requires a minimum of Release 3.1 for operational support. This card is designed to accept the optional Multi-Service Traffic Shaping Module (MTSM, 90-4724-01) which, when installed, provides enhanced traffic management features. This card variant is shipped R4.2 S/W.