7270 T1 8PORT I/O CARD clei The T1 I/O card provides 8 ports that may be software-configured as an off-premise (DS-1) or on-premise (DSX-1) interface using RJ45 connectors. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

7470 CALLP CARD-2 W/ EPM R4.3 clei This is a UCS card that provides switched services and call processing functions for the switch. It is required for systems that support SVCs and/or S-PVCs, and should not be used in systems which employ an Integrated Control card. This card is delivered with R4.3 software and an enhanced Processor Module (ePM). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

7470 CONTROL CARD-2 W/EPM R5.0 CONTROL CARD-2 W/EPM

7470 CONTROL CARD-2 W/EPM R5.0 The Control Card 2 implements the control complex functions for the node. The Control Card 2 provides two RS-232 ports node management (local and/or remote NMTI), and one Ethernet 10BaseT interface port for network management system access. One Control Card is required for non-redundant control complex and two for control complex redundancy per 7470 system. Node management, alarm, and timing termination require a control card interconnect panel (CCIP). One CCIP serves both active and redundant control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2)requirements. This card is delivered with R5.0 software and with an enhanced Processor.

7470 DATA SPOOLING CARD-2 W/ EPM R4.3 This is a UCS card that transfers statistics and accounting data to an external Data Collector, for billing or bulk statistics accumulation. Comes with DB-25 to RJ-34 Ethernet 10Base-T MAU. This card is delivered with R4.3 software and with an enhanced Processor Module (ePM).

7470 DATA SPOOLING CARD-2 W/EPM R5.0 This is a UCS card that transfers statistics and accounting data to an external Data Collector or Statistics Collector, for billing or bulk statistics accumulation. Comes with DB-25 to RJ-34 Ethernet 10Base-T MAU. This card is delivered with R5.0 software and with an enhanced Processor Module(ePM).

7470 MAU -16 PORT PRI AMP/CHAMP The PRI AMP/CHAMP MAU provides a 64 pin connector for the 7470 16 port PRI cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78).

7470 MAU -16 PORT PRI WIRE WRAP The PRI Wire Wrap MAU provides a wire wrap connector (66 posts) for the 7470 16 port PRI cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78). As of August 1 2003 the WW MAU will be RESTRICTED to NON EU customers only because it does not meet Class A EU2003 for Conducted emissions on I/O Lines. The recommended replacement part is the AMP Champ MAU: 90-2542-01 MAU, PRI AMP/CHAMP and 90-2542-04 MAU, PRI AMP/CHAMP.

7470 MAU -16 PORT T1/E1 WIRE WRAP The T1/E1 Wire Wrap MAU provides a wire wrap connector (66 posts) for the 7470 16 port T1/E1 cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78). As of August 1 2007 the WW MAU can not be sold in countries which require compliance to EN55022:1998 or CISPR22:1997 as these specifications include requirements for conducted emissions on telecommunication ports. The recommended replacement parts are either the AMP Champ MAU: 90-2542-01 MAU, T1/E1 AMP/CHAMP, or the 90-2542-04 7470 MAU -16 PORT T1/E1 AMP/CHAMP .

7470 MAU -16 PORT T1/E1I AMP/CHAMP The T1/E1 AMP/CHAMP MAU provides a 64 pin connector for the 7470 16 port T1/E1 cards. It attaches to the rear I/O connectors of the Peripheral Shelf (DB78).

7470 OC12-2 IR clei The OC12-2 ATM IR Card is a UNI/NNI OC12 ATM interface card operating at the SONET OC12 rate of 622 Mbps, with 32k egress cell buffering per card and advanced traffic management capability. The Intermediate Reach(IR) single mode fiber optional interface has a total loss budget of 12 db. The OC12-2 employs the CPU-2 module for enhanced call performance.

7470 OC12-2 IR clei The OC12-2 ATM IR Card is a UNI/NNI OC12 ATM interface card operating at the SONET OC12 rate of 622 Mbps, with 32k egress cell buffering per card and advanced traffic management capability. The Intermediate Reach(IR) single mode fiber optional interface has a total loss budget of 12 db. The OC12-2 employs the CPU-2 module for enhanced call performance.

7470 OC12-2 IR The OC12-2 ATM IR Card is a UNI/NNI OC12 ATM interface card operating at the SONET OC12 rate of 622 Mbps, with 32k egress cell buffering per card and advanced traffic management capability. The Intermediate Reach(IR) single mode fiber optional interface has a total loss budget of 12 db. The OC12-2 employs the CPU-2 module for enhanced call performance. The OC12-2 requires a minimum of release 4.2 for operational support.

7470 OC12-2 LR clei Identical to the 90-6197-31 except the Long Reach (LR) single mode fiber optical interface has a total loss budget of 24 db.

7470 OC12-2 LR clei Identical to the 90-6197-31 except the Long Reach (LR) single mode fiber optical interface has a total loss budget of 24 db.

7470 OC12-2 LR Identical to the 90-6197-31 except the Long Reach (LR) single mode fiber optical interface has a total loss budget of 24 db.

7470 OC12-2 SR Identical to the 90-6197-31 except the Short Reach (SR) card utilizes a multi mode fiber optical interface. The SR card has a total loss budget of 6 db.

7470 OC12-2 SR Identical to the 90-6197-31 except the Short Reach (SR) card utilizes a multi mode fiber optical interface. The SR card has a total loss budget of 6 db.

7470 OC12-2 XLR 1550 Identical to 90-6197-31 except the Extra Long Reach (XLR) single mode fiber optical interface has a center wavelength of 1550 nm.

7470 OC12-2 XLR 1550 Identical to 90-6197-31 except the Extra Long Reach (XLR) single mode fiber optical interface has a center wavelength of 1550 nm.