INTEG CALLP/PNNI CARD-2 R4.3 This card provides the functionality of a R4.3 Control Card-2, a R4.3 CallP Cad-2 and a R4.3 PNNI Card-2, all combined on a single card. One card is required for non-redundant operation, and two cards for redundancy per 36170

INTEG CALLP/PNNI CARD-2 R4.3 This card provides the functionality of a R4.3 Control Card-2, a R4.3 CallP Cad-2 and a R4.3 PNNI Card-2, all combined on a single card. One card is required for non-redundant operation, and two cards for redundancy per 36170 system. This card must be installed in Contron Card slots only, and cannot be used in systems that have also been configured with CallP-2 Cards or PNNI-2 Routing cards. Node management, alarm, and timing terminations required a control card interconnect panel (CCIP). One CCIP serves both active and redundant integrated control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R4.3 software. Note that this card uses the Processor Module, and that the enhanced Processor Module (ePM) is required to upgrade to R5.0. Consequently, it is recommended that 90-6226-07 or 90-6226-09 be used instead of this part.