V.35 PRI CARD This card presents a 30 channel, V.35 interface. Allows for faceplate (DB-25) or backplane (50 pin Champ) access. Configured as a Data Termination Unit (DTE). Supported bit rates are from 64 Kbps to 1920 Kbps. This card is supported by Generic 1113 or greater, and also offers reduced framing overhead allowing for additional HCM data. For use with V.35 DB25M-M34M DCE Cables (90-0360-0X).

V.35 SUBD26M-M34F DTE CABLE 3M. This cable is for use with the Programmable Serial Interface I/O card.

V.35-M34 DIST PANEL 19 inch rack mountable assembly which provides backplane access to six V.35 circuits via six M34 female connectors. Included are two 25 pair cables required to connect the distribution panel to the system.

V35-M34 DIST PANEL 19 inch rack mountable assembly which provides backplane access to six V.35 circuits via six M34 female connectors. Included are two 25 pair cables required to connect the distribution panel to the system.

Video JPEG Adpt. Card

VIVID ATM Workgroup Switch

VIVID Yellow Ridge ATM

VOICE COMPRESSION MOD

VOICE COMPRESSION MOD Daughter card used on the Dual T1 (90-0564-01) and Dual E1 (90-9244-01, 90-9244-02) mother cards to provide up to 44 ANSI compatible or 55 CCITT compatible ADPCM compressed voice channels using bundled (delta channel) signalling. When using 3600/45 Release 5.2 or greater, transitional signalling is also available.

VOICE COMPRESSION MOD 3 Daughter card used on the Dual T1 (90-0564-01) and Dual E1 (90-9244-01, 90-9244-02) mother cards to provide up to 44 ANSI compatible or 55 CCITT compatible ADPCM compressed voice channels using bundled (delta channel) signalling. When using 3600/45 Release 5.2 or greater, transitional signalling is also available.

VOICE KRONE BLOCK

VSC DSP1 TRANSPORT MODULE - G.729A clei VSC DSP1 Transport Module: Supports up to 40 voice channels, i.e. 40 channels of either G.729A (CS ACELP), G.711 (PCM), G.726 (ADPCM), NetCoder, or clear channel. Provides silence suppression, idle channel detection, and integrated echo cancellation of up to 30 ms tail length per channel. Note: At least one VSC DSP1 module must be installed on every Voiceband Service Card 90-4653-xx 90-6757-xx See also: 90-4654-01 This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

VVD SBUS NIC OC-3C MMF CPSS ATM SBUS NIC

WIRE WRAP ADAP MOD PKG Wire wrap adaptor modules. Allows for wire wrap connections to 3600/3645 systems. Package contains one set of adaptor modules for one 3600 or 3645 shelf (PU or SU). Includes two T1 (AMP CHAMP), two ALARM I/O (DB25) and two composite clock (DB25) adaptor modules. For 90-0010-13/14/15, and 90-0662-04/05/06. Alarm I/O adapters are compatible with GFC-2 equipped with Alarm Module-2 (90-0077-05, 90-0078-06) and Clock card equipped with Alarm Module-2 (90-0641-03/04).

WIRE WRAP ADAP T1 16 PK Wire wrap adaptor modules. Allows for wire wrap connections to 3600/45 systems. Package contains 16 T1 AMP CHAMP modules.

X-ISL 800M ISL HUB The Extended ISL (X-ISL) 800M Hub card provides one bi-directional 800M ISL link supporting all 12 UCS slots in a peripheral shelf. Two 800M Hub Cards are required per peripheral shelf for fabric redundancy in multi-shelf systems. This card is delivered with R4.2 application software. X-ISL reach is 15km over customer supplied Single Mode Fiber. SMF cable requirements are: 9/125 micron core/cladding, 0.35 dB/Km attenuation at 1310nm, flat polish SC/SC connector.

X.21 DB25M-DB15M Identical to 90-0628-02 except the cable is 6 meteres in length.

X.21 DCC (6 CCT) System expansion card, allows for a 6 UCS single shelf system to expand to a 16 slot double shelf system capable of 3.840 Mb/s (60 DS0) of bandwidth per card slot. Requires a second shelf, second power supply and the appropriate intershelf cabling to complete the expansion. This card is supported by Generic 1113 or greater. (Includes 90-0075-02) Expander Module (16+).

X.21 DCC (6 CCT) This card offers six CCITT V.35 interfaces. Three of the circuits are available at the backplane connector and three others are available on the card's faceplate connector (AMP CHAMP). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

X.21 DCC (6 CCT) This data card provides six CCITT X.21 interfaces. Two of the six interfaces are presented on the faceplate of the card via a 25 pair AMP CHAMP connector. The remaining four interfaces are available at the backplane connectors. This card also supports a subset of RS-449.