E1 CE 120 8 PORT The 8 Port E1 Circuit Emulation Card multiplexes/demultiplexes the circuits over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. Fits: 7470 or 7670 RSP ESE For 7670 RSP ESE, required adapter card is 90-7272-01.

E1 CE 75 OHM 8 PORT CARD The 8 Port E1 Circuit Emulation Card with 75 ohm interface impedance multiplexes and demultiplexes the circuits carried over a TDM channelized link and performs the necessary operations to allow the transport of these circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM Forum. This card is not certified for use with the CE-EC echo cancellation modules. Use the 120 ohm 8-port CE card with the CE-EC modules.

E1 RJ45 Distribution Panel This E1 RJ45 Distribution Panel provides 8 external RJ45 interfaces to the 120 ohm E1 twisted pair ports of an E1CE card. It may only be used with E1 CE cards 90-2517-X2. The panel is a 1 vertical unit (VU) high rack mountable device.

E1/T1 APS SHELF The E1/T1 APS Shelf consists of a card cage and a backplane which houses APS Cards that work with the 8-port CE cards. The shelf, together with the I/F CARD T1/E1 APS (90-6345-02) and CONTROL CARD T1/E1 APS (90-6346-01) provide N:1 Automatic Protection Switching support for T1/E1 CE Cards on the 7470 by switching the traffic on a failed card to the protection card.

E3 3/1/0 2PORT CE (MAU EXCLUDED) The E3 3/1/0 Circuit Emulation Card performs the necessary operations to allow the transport of individual 64k time-slots, N*64k groups of timeslots, E1s,or full E3 circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM forum. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-02 for deployment in 7670 ESE shelf.

E3 UFR The E3 Unchannelized Frame Relay Card provides a single standards-compliant E3 interface to the 7470 or 7670 ESE system. This interface terminates one unchannelized frame relay stream and will perform standards-based frame switching network-interworking or service-interworking. In the 7470, the card requires MAU 90-4919-01. In the 7670 ESE, adapter card 90-7307-02 and MAU 90-7308-01 are necessary.

E3-2 ATM UNI/NNI W/CPU-2 This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems. The E3-2 ATM Card w/CPU-2 is a triple port card. Each port is either UNI or NNI operating at 45Mbps. Each interface has dual coax BNC connectors with a range of 450 feet. The E3-2 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1). This E3-2 card provides 4.5K connections per port, larger buffers, more service categories, substantially higher call processing capabilities and a Traffic Shaping Module position for support of the optional enhanced traffic management features. The Multi-Service Traffic Shaping Module (MTSM), per 90-4724-01, is *NOT* supported on this card. The enhanced Traffic Management (eTM) module is supported and can be ordered as 90-7695-01. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-02 for deployment in the 7670 ESE shelf. The 90-2322-01 and 90-7308-02 MAUs are not shipped with the E3-2 card and each must be ordered separately. The E3-2 card can be used in a 7670 ESE node with the appropriate adaptor card.

ENHANCED TRAFFIC MGNT MOD. clei The Enhanced Traffic Management (ETM) module is an optional module for the DS3-2, E3-2, OC3-2,STM1-2, OC3-2M and STM1-2M cell relay line cards. It provides the Traffic Management features of the Titan ASIC, including increased cell buffer size (1M cells), Weighted Fair per-VC Queuing (WFQ) for all service categories, ingress and egress per-VC shaping, VP Aggregation and ABR VS/VD and ER marking, in addition to the features and functionality provided by the MTSM module. Requires a minimum of R4.3 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

FIC FILLER PLATE A Fabric Interface Card (FIC) Filler Plate. This is requied for EMI specification conformance and proper airfolw. Pack of seven (7).

FILLER PLATES-DSC&H/S SLOTS This package contains seven filler plates for the DSC slots in a Switching Shelf or the High Speed Line Card slots in a High Speed Peripheral shelf.

H/S PERIPHERAL SHELF CARD FILE clei Cardfile designed for 19 rack. It is used for high speed interface cards and Dual Fabric Interface Cards (FIC). Each High Speed Peripheral Shelf is functionally divided into four sub-units, each comprised of two full height interface card slots and two 1/2 height FIC slots. Each sub-unit can support the two interface slots as either independent cards or as a redundant pair, with redundant fabric operation in both cases. Each FIC terminates up to two ISLs and is used to interface to one of the redundant switching fabrics. Two FICs must be installed in each independent sub-unit of the HSPS to provide fabric redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label. Requires 90-9165-01 for EU EMI Compliance.

HS FIC-1310 FOR OC12-STM4-2 clei The Dual Fabric Interface Card (FIC) for the OC12-2 provides interconnection of high speed interface cards installed in a High Speed Peripheral Shelf (HSPS) to a 7470 Switching Shelf through standard 1310 Nm Inter-shelf Links (ISLs). Each FIC terminates up to two ISLs and is used to interface to one of the redundant switching fabrics. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

HUB FILLER PLATE Filler plate card for the Hub slot of the Peripheral shelf. The Peripheral shelf has a total of 2 Hub card slots.

IMA MODULE-T1/E1 ATM CR clei This module provides the Inverse Multiplexing for ATM capability for the T1/E1 ATM Cell Relay interface cards (90-6351-0x). The module supports either ATM Forum IMA v1.0 or v1.1 through separate software loads. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

INTEG CALLP/PNNI CARD-2 WITH EPM clei This card provides the functionality of a Control Card, a CallP Card-2 and a PNNI Card-2, all combined on a single card. Two cardsare required for redundancy per 7470 system. This card must be installed in Control Card slots only, and cannot be used in systems that have been configured with CallP-2 Cards or PNNI-2 Routing cards. Node management, alarm, and timing terminations require a control card interconnect panel (CCIP). One CCIP serves both active and redundant integrated control cards. There are two variants of CCIP for US Telco (90-2295-x1) and International (90-2295-x2) requirements. This card is delivered with R6.0 software, a larger SanDisk and with an enhanced Processor Module (ePM).

IP SERVICES CARD (ISC) clei This card enables additional IP functionality on existing interfaces for the 7470 MSP. Dynamic routing using OSPF is supported. 1+1 redundancy of ISCs is supported when installed in adjacent slots and with the use of a Dual Mau (90-6819-01). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

ISL 10M-DUPLEX CABLE This part contains the Up and Down ISL cabling required to interconnect a Dual Peripheral Shelf to the Switching Shelf, or one subunit of a High Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 10 meter duplex fiber cable with staggered ends. The part includes two dual ISLs, where each dual ISL consists of two bundled 800 Mb/s strands that together create an Up or Down ISL at 1.6 Gb/s.

ISL 10M-SIMPLEX CABLE This part contains the Up and Down ISL cabling required to interconnect a Low Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 10 meter single fiber cable with staggered ends. The part includes two ISL cables, where each ISL cable consists of an 800 Mb/s strand to create an Up or Down ISL.

ISL 3M-DUPLEX CABLE This part contains the Up and Down ISL cabling required to interconnect a Dual Peripheral Shelf to the Switching Shelf, or one subunit of a High Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 3 meter duplex fiber cable with staggered ends. The part includes two dual ISLs, where each dual ISL consists of two bundled 800 Mb/s strands that together create an Up or Down ISL at 1.6 Gb/s.

ISL 6M-DUPLEX CABLE This part contains the Up and Down ISL cabling required to interconnect a Dual Peripheral Shelf to the Switching Shelf, or one subunit of a High Speed Peripheral Shelf to the Switching Shelf. This part number is a multi-mode 6 meter single fiber cable with staggered ends. The part includes two dual ISLs, where each dual ISL consists of two bundle 800 Mb/s strands that together create an Up or Down ISL at 1.6 Gb/s.