36LG R8.0 CD CUST DOC Complete customer documentation package for Generic 1118.0 of the 3600 Mainstreet Bandwidth Manager; Generic C/D/E/H118.0 of the 3645 Mainstreet High Speed Bandwidth Manager; Generic Q118.0 of the 3664 Mainstreet Fractional Access Multiplexer; Release 8.0 of the 3600+ Mainstreet High Capacity Bandwidth Manager; and Release 3.0 of the 36120 Mainstreet Packet Transfer Exchange in a CD ROM format.

36LG REL 8.0 CUST DOC Complete customer documentation package for Generic 1118.0 of the 3600 MainStreet Bandwidth Manager; Generic C118.0 of the 3645 MainStreet High Speed Bandwidth Manager; Generic Q118.0 of the 3664 MainStreet Fractional Access Multiplexer, Release 8.0 of the 3600+ Mainstreet High Capacity Bandwidth Manager; and Release 3 of the 36120 MainStreet Packet Transfer Exchange in an 8 1/2 x 11 format.

36LG REL 9 CUST DOC Complete customer documentation package for Generic 1119.0 of the 3600 MainStreet Bandwidth Manager; Generic C119.0 of the Multi Shelf System (former 3645); Release 9.0 of the 3600+ Mainstreet High Capacity Bandwidth Manager; and Release 3 of the 3600 with FastBus Option(former 36120)

CSU-2 MODULE clei Required for compliance to PUB-62411. Required to connect direct to T-1 lines from carrier; powered from system only; no wetting current; includes circuitry for bypass switching; does not include circuitry for redundancy switching. For use with T1 (90-0093-05) DT1 (90-1625-02) and DT1-2 (90-1625-02) as well as T1 Based 3630 systems. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DUAL E1 CARD 3 DISTRIBUTION CABLE This cable assembly is used to connect 90-9244-01 DUAL E1 CARD 3 (75 OHM), and 90-9244-02 DUAL E1 CARD 3 (120 OHM) with the distribution panel. The part number for the distribution panel is; 90-2635-02 DUAL E1 CARD 3 DISTRIBUTION PANEL. The cable and distribution panel together provide a means to connect the Dual E1 card circuits to external equipment.

E1-75 OHM LIM MODULE clei One per E-1 circuit required to interface to G.703 75 ohm asymmetrical; includes enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

FASTBUS INTERCONN PANEL Panel that terminates up to 12 STP modules (90-1832-01) and optionally, 2 cascade modules; either STP (90-1651-01) or fibre (90-1653-01). Unused positions must be stuffed with bypass modules (90-1652-01). Includes backplane, card file, 2 STP modules (90-1832-01) and 13 bypass modules (90-1652-01)

RING GENERATOR PSU The Ring Generator PSU is intended for use with the External Ring Generator assembly (90-5945-01), and 3600 system power trays (90-3669-xx). The Ring Generator PSU includes one ringing power supply unit (PSU) and grounding wire. There are some switches on the product to select; DC bias, and operation frequency (16Hz, 20Hz, or 25Hz). The External Ring Generator configuration requirements: dual output, redundant operation = 4 Ring Generator PSU; single output, redundant operation = 2 Ring Generator PSU; dual output, non-redundant operation = 2 Ring Generator PSU.

T1 LIM MODULE clei One per T-1 circuit required for operation with external CSU or for systems requiring a DSX-1 electrical interface; provides enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

2.048 E1 MBPS CARD (120 OHM) Similar to 90-0371-02 but tailored for 120 OHM application. Supports rear AMP CHAMP signal access only. Requires one 90-0568-02 (120 ohm) E1 LIM.

2.048 E1 MBPS CARD (75 OHM) Mother card for single 2.048 Mbps E1 electrical interfaces. Conforms to CCITT G.703 and G.732. Requires the E1 LIM (90-0568-01) daughter card to complete the interface. The Superrate Adaptor Module (90-0469-01) for E1/T1 rate conversion or the Companding Conversion Module (90-0369-01) for A-law, Mu-law conversion are also supported.

23IN ADAPTOR (2 UNIT) Adaptor plate required to mount the 90-0890-01, 90-0890-02, and 90-1236-01 assemblies or any other 19 inch rack mount assemblies of two vertical units, to a 23 inch rack.

23IN CARD FILE ADAPTOR Adaptor plate required to mount 90-0010-02, 90-0010-04, and 90-0010-10 3600 shelves to 23 equipment racks. Only one required.

23IN DIST PANEL ADAPTOR Adaptor plate required to mount 90-0348-01, 90-0349-01, 90-1066-01 and 90-0350-01 distribution panels in 23 inch equipment racks. Only one required.

27LC3-12 LINE CARD The 27LC3 line card is used in the 3600 and 3600+ Mainstreet. This card provides twelve 2B1Q interfaces to 275X Extended Range Data Termination Units(DTU's). Data Format for each circuit is 2B+D, with an effective throughput of 144KBPS.

2B1Q-27LC2 LINE CARD (6 CCT) This card provides six 2B1Q interfaces to 270X Extended Range Data Termination Units (DTU's). Data Format for each circuit is 2B+D, with an effective throughput of 144KBPS. This card is for use in 360 0/3645 systems, and is the mother card for the DPM1 (90-0297-02) and DPM2 (90-0616-01).

3600 ATM AAL1/5 (E1) SERVICES CARD Provides AAL1 and AAL5 service adaptation, Cell Multiplexing (UNI 3.1) and n x E1 (n=1, 2, 3 or 4) aggregate trunks. Also provides ATM Inverse Multiplexing (IMA). A front cover (90-3647-01) is required when this card is used in Class B or EU applications.

3600/45 KIT US-BASIC This installation kit contains cables/screws/antistatic strap/ground wire/spade lugs in order to install a 3600/45 single shelf into a rack or cabinet.

36LG GFC-2 FILLER PLATE A single filler plate used in place of the GFC-2 card in slot 12. This filler plate is used to maintain cooling requirements for partially filled 3600 shelves. This plate can be used for either EMC or non-EMC shelves.

36LG REL 8.0 CD S/W This kit provides node software for the current maintenance version of 36LG Rel 8.0. Includes CD ROM.