CSU-2 MODULE clei Required for compliance to PUB-62411. Required to connect direct to T-1 lines from carrier; powered from system only; no wetting current; includes circuitry for bypass switching; does not include circuitry for redundancy switching. For use with T1 (90-0093-05) DT1 (90-1625-02) and DT1-2 (90-1625-02) as well as T1 Based 3630 systems. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

E&M MODULE (+4/-10 DB) clei Single E&M module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10.5DB for receive and +4 to -3.5DB for transmit. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB. Module employs Type 1 or Type 2 signalling. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

E&M MODULE (A-LAW) Single E&M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5 DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signaling. (Type 2 signaling is supported by a special wiring configuration that requires separate external 48VDC source).

E&M MODULE (TYPE 1) Single E&M module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signaling.

E&M MODULE (TYPE 5) Single E&M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +8.5 DB to -7DB in 2W mode and -5 to -16 in 4W mode; module employs Type 5 signaling.

E1-75 OHM LIM MODULE clei One per E-1 circuit required to interface to G.703 75 ohm asymmetrical; includes enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

FXO (LGE) MODULE (+4/-10DB) clei Single FXO (LGE) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10 DB for receive and +3 to -4 DB for transmit; module operates as FXO or DPT circuits. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

FXO (LGE) MODULE (0/-7DB) Single FXO (LGE) module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -7 DB; module operates as FXO or DPT circuits.

FXS (LGS) MODULE (A-LAW) Single FXS (LGS) module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of 0 to -7DB; module provides line reversal capability.

FXS (LGS) MODULE (LR) Single FXS (LGS) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit; this module provides line reversal capability and increased loop performance. Module operates as FXS, PLAR or DPO circuits. Recommended for all new installations.

FXS (LGS) MODULE (UK) Single FXS (LGS) module for general applications interfacing to voice terminal equipment certified to connect to public networks in the United Kingdom; module provides line reversal and third-wire capability; does not apply to 3624 MainStreet. Offers TLP's of +1/-6 for receive and +4/-3 for transmit.

FXS(LGS) MOD(CI) W/OHX CALL ID SPPT clei Single FXS module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit; this module provides line reversal capability and increased loop performance. Module operates as FXS, PLAR or DPO circuits. Module offers complex impedance of 600 +2.15 microfarad and supports on-hook calling line ID. Recommened for new installations. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

T1 LIM MODULE clei One per T-1 circuit required for operation with external CSU or for systems requiring a DSX-1 electrical interface; provides enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

TONE MODULE clei One per system required for Megacom800 and PLAR applications, where the CPE does not send ringback tone to the network; module is mutually exclusive with DDS Module (90-0160-01 or 90-0160-02) or any of the DSP modules. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

V.35 MODULE clei Single V.35 module providing for a single V.35 compatible interface (DTE or DCE) per module. Three control leads are supported; DCD/RTS/ALB when configured as DCE. These modules cannot be used to derive a clock for system synchronization. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

.19 UDP RM BRKT Mounting bracket used for mounting two 3620 Distribution Panels (90-2255-01) or two 3612/24 Base Distribution Panels (90-2256-01) or one 3630 Base Distribution Panel (90-2257-01) into a 19 rackmount c onfiguration. Personality modules and Base Distribution Panels ordered separately.

3612/3624/3630 WALL MOUNT BRACKET A pair of brackets that will allow a 3612, 3624,or 3630 system (90-0575-68, 90-0411-57,90-0411-58, 90-0412-52,90-0412-58, 90-2002-04, and 90-2003-03) to be wall mounted.

3630 2X4 VCB MODULE Digital voice conference bridge module with a maximum capacity of eight bridges. The eight bridges are partitioned into two groups of four, each group has a pool of 12 inputs which can be allocated as desired across the four bridges. This module is installed in the DSP slot of the 3630 and is mutually exclusive with Tone or DDS modules (90-0512-01, 90-0160-01).

3630 R5.3 E1 100-240VAC SYSTEM Desktop, wall-mount, 19 rack-mount system. Provides two E-1(2.048 Mb/s) links. Includes internal power supply (100-240VAC) with integral ringing generator (factory set to 25Hz, user configurable to 20Hz), common control, Universal card, display assembly and software 91X5. Optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately. If the optional slider (90-9084-01) is required , order 90-0411-67.

3630 R5.3 E1 100-240VAC SYSTEM W SLIDER Identical to 90-0411-57 but with sliders to allow access to a system by pulling the chassis outward from an equipment rack.

3630 R5.3 E1 48VDC SYSTEM Desktop, wall-mount, 19 rack-mount system. Provides two E-1(2.048 Mb/s) links. Includes internal power supply (48VDC) with integral ringing generator (factory set to 25Hz, user configurable to 20Hz), common control, Universal card, display assembly and software 91X5. Optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately. If the optional slider (90-9084-01) is required , order 90-0411-68.

3630 R5.3 E1 48VDC SYSTEM W SLIDER Identical to 90-0411-58 but with sliders to allow access to a system by pulling the chassis outward from an equipment rack.

3630 R5.3 PAPER DOC A set of manuals for the 3630 at Release 5.3. Includes Installation, Configuration, Maintenance manuals as well as a Quick Reference Guide. Manuals are assembled in a binder.

3630 R5.3 S/W KIT System software for 3630 T1 and E1 systems. Includes a frotn panel label (new alarm LED designators) required when upgrading from Release 2, 3, 4, or existing release 5.

3630 R5.3 T1 100-240VAC SYSTEM W SLIDER Desktop, wall-mount, 19 rack-mount system. Provides two T-1(1.544 Mb/s) links. Includes internal power supply (100-240VAC) with integral ringing generator (factory configured to 20Hz, user configurable to 25Hz), common control, Universal card, display assembly, slider assembly and software 91X5. Optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately.

3630 R5.3 T1 48VDC SYSTEM W SLIDER Desktop, wallmountable, 19 rackmountable system. Provides two T-1 (1.544 Mb/s) links. Includes internal 48VDC power supply with integral 20Hz ringing generator 20Hz, common control, Universal card, display assembly, slider assembly and software 91X5. Optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately

3630 SUPER-RATE RES MOD Module required to support X.21 <(>&<)> V.35 DCM speeds above 64 kb/s (n * 64K). For E1 3630's this module is required to support one or more super-rate ports. For T1 3630's the module is only required where more than one super-rate port is needed. This module is mutually exclusive with any other 36SMCP module (including Tone, DSP and VCB modules). For both E1 and T1 systems this module is required for 4602/46020 GUI support.

3630 UDP W/EXT COVER Base distribution panel for use with 3630 systems. It will allow installation of up to eight 36SM personality modules. Includes an extended cover (90-2303-01) which allows for installation of the V.35/M34 personality module (90-2258-04). (90-234X-XX) cables hat connect the Basic System to the Universal Distribution Panel are sold separately. Requires 36SM Distribution Panel rackmount bracket for rackmount installation (90-2254-01).

36SM 2B1Q MODULE Single 2B1Q Module connecting any of the following data termination units: 2751 RS-232/V.24 DTU, 2752 X.21 DTU, and 2753 V.35 DTU providing the node S/W supports the DTU.

36SM INSTALLATION KIT Contains DB25 to RJ45 cable adaptors, RJ45 cables, anti-static strap, miscellaneous tools and mounting hardware required to install one 2902, 3612, 3620, 3624, or 3630 wall mount system.

36SM PASS THROUGH UDP MODULE clei Four port voice distribution module which provides pass through connection from input to output AmpChamp connectors. For use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03). Passes termination to the auxiliary connection for use with an external punchdown block. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

36SM PUNCH-DOWN UDP MODULE Voice Direct Adaptor Module for use with the 36SM Base Distribution Panel (90-2256-03, 90-2257-03). Used with the tributary T1, OCU, 4WTO, 2WTO, LGS, LGE, MRD and E&M Modules.

36SM RM DRAWER SLIDE ASSEMBLY The drawer slide assembly is intended for use witthe 3612, 3624 rack mount systems(90-0412-58, 90-2002-04, and 90-2003-03). This slide assembly allows access to a system by pulling the chassis outward from an equipment rack. 3630s can be ordered with a pre-intalled slider by ordering 90-0411-67, 90-0411-68, 90-0412-62 or 90-0412-68.

36SM UDP EMC CBL 3M Identical to 90-2342-01, but 3 meters in length.

36SM UDP N-EMC CBL 1.5M 180 DEG Non shielded, 180 deg. headshell, 1.5 meter in length small mux panel cable for connecting to small mux distribution panels (90-2255/6/7-03).

36SM UDP N-EMC CBL 3M 180 DEG Non shielded, 180 deg. headshell, 3 meter in length small mux panel cable for connecting to small mux distribution panels (90-2255/6/7-03).

36SM UDP N-EMC CBL 6M Identical to 90-2341-01, but 6 meters in length.

36SM V.24/RS232 DCE UDP MODULE Dual port DB25, V.24 DCE adaptor module for use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03).

36SM V.35/M34 DCE UDP MODULE Single port M34, V.35 DCE adaptor module for use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03).

36SM X.21 DCE UDP MODULE Single port DB15 X.21 DCE adaptor module for use with the 36SM Base Distribution Panel (90-2256-03 or 90-2257-03).

64K CO-DIR MODULE G.703 Co-directional DCM's. Two interfaces provided without signalling, one interface with ABCD signalling (software selectable). Either interface can provide system sync.

AMPCHAMP M-F 4M CABLE 180 DEG Straight through male to female ampchamp cable with 180 deg. headshell.

DUAL BNC-RJ45 ADPT An adaptor which physically converts dual BNC to RJ45. Conversion is physical only, no impedance adaptation. The BNC connections are male, the RJ45 connection is female.

E1-120 OHM LIM MODULE Variant of the E1 LIM (90-0568-01) which only supports 120 ohm interface. All other features of the E1 LIM are supported.

FXO (LGE) MODULE (A-LAW) Single FXO (LGE) module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of 0 to -7 DB.

FXS (LGS) MODULE (+4/-10DB) clei Single FXS (LGS) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit. Module operates as FXS or PLAR circuit. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

LINE VOLTAGE MODULE One per 3612 or 3630 required, if 48V signaling is required with LGS interfaces, or Vbat feed for E<(><<)>(>&<(><<)>)>M type 2 interfaces.

MRD GEN/GEN 600 OHM MOD Manual Ringdown A-LAW Module with 600 Ohm resistive impedance. Tailored for Gen/Gen use only.

RS232/V.24 MODULE clei Single RS232 module providing for dual RS-232/V.24 interfaces per module. Most common synchronous and asynchronous speeds are supported up to 64KBPS. Both HCM and transparent framing formats are supported. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

X.21 MODULE Supports both DTE and DCE operation. Supports both HCM and Transparent rate adaption. Two control leads supported: C/I. Supports NX56/64 super-rate operation. ***This module cannot be used as a source for system synchronization.***