CSU-2 MODULE clei Required for compliance to PUB-62411. Required to connect direct to T-1 lines from carrier; powered from system only; no wetting current; includes circuitry for bypass switching; does not include circuitry for redundancy switching. For use with T1 (90-0093-05) DT1 (90-1625-02) and DT1-2 (90-1625-02) as well as T1 Based 3630 systems. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

E&M MODULE (+4/-10 DB) clei Single E&M module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10.5DB for receive and +4 to -3.5DB for transmit. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB. Module employs Type 1 or Type 2 signalling. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

E&M MODULE (A-LAW) Single E&M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5 DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signaling. (Type 2 signaling is supported by a special wiring configuration that requires separate external 48VDC source).

E&M MODULE (TYPE 1) Single E&M module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of +4.0 to -3.5DB. Extended TLP'S are available in 4 wire mode; receive: +11 to +3.5DB, transmit: -12 to -19.5 DB, module employs Type 1 or Type 2 signaling.

E&M MODULE (TYPE 5) Single E&M module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of +8.5 DB to -7DB in 2W mode and -5 to -16 in 4W mode; module employs Type 5 signaling.

E1-75 OHM LIM MODULE clei One per E-1 circuit required to interface to G.703 75 ohm asymmetrical; includes enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

FXO (LGE) MODULE (+4/-10DB) clei Single FXO (LGE) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10 DB for receive and +3 to -4 DB for transmit; module operates as FXO or DPT circuits. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

FXO (LGE) MODULE (0/-7DB) Single FXO (LGE) module for end-to-end or corporate network connections interfacing to North American voice terminal equipment with TLP's for receive and transmit of 0 to -7 DB; module operates as FXO or DPT circuits.

FXS (LGS) MODULE (A-LAW) Single FXS (LGS) module for general applications interfacing to European and International voice terminal equipment with TLP's for receive and transmit of 0 to -7DB; module provides line reversal capability.

FXS (LGS) MODULE (LR) Single FXS (LGS) module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit; this module provides line reversal capability and increased loop performance. Module operates as FXS, PLAR or DPO circuits. Recommended for all new installations.

FXS (LGS) MODULE (UK) Single FXS (LGS) module for general applications interfacing to voice terminal equipment certified to connect to public networks in the United Kingdom; module provides line reversal and third-wire capability; does not apply to 3624 MainStreet. Offers TLP's of +1/-6 for receive and +4/-3 for transmit.

FXS(LGS) MOD(CI) W/OHX CALL ID SPPT clei Single FXS module for termination of North American public network services such as UltraWATS, SDN, Megacom and VPN series offering TLP's of -3 to -10DB for receive and +4 to -3DB for transmit; this module provides line reversal capability and increased loop performance. Module operates as FXS, PLAR or DPO circuits. Module offers complex impedance of 600 +2.15 microfarad and supports on-hook calling line ID. Recommened for new installations. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

T1 LIM MODULE clei One per T-1 circuit required for operation with external CSU or for systems requiring a DSX-1 electrical interface; provides enhanced loop-back capabilities and circuitry for bypass switching and interface redundancy. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

TONE MODULE clei One per system required for Megacom800 and PLAR applications, where the CPE does not send ringback tone to the network; module is mutually exclusive with DDS Module (90-0160-01 or 90-0160-02) or any of the DSP modules. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

V.35 MODULE clei Single V.35 module providing for a single V.35 compatible interface (DTE or DCE) per module. Three control leads are supported; DCD/RTS/ALB when configured as DCE. These modules cannot be used to derive a clock for system synchronization. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

.19 UDP RM BRKT Mounting bracket used for mounting two 3620 Distribution Panels (90-2255-01) or two 3612/24 Base Distribution Panels (90-2256-01) or one 3630 Base Distribution Panel (90-2257-01) into a 19 rackmount c onfiguration. Personality modules and Base Distribution Panels ordered separately.

3612/3624/3630 WALL MOUNT BRACKET A pair of brackets that will allow a 3612, 3624,or 3630 system (90-0575-68, 90-0411-57,90-0411-58, 90-0412-52,90-0412-58, 90-2002-04, and 90-2003-03) to be wall mounted.

3630 2X4 VCB MODULE Digital voice conference bridge module with a maximum capacity of eight bridges. The eight bridges are partitioned into two groups of four, each group has a pool of 12 inputs which can be allocated as desired across the four bridges. This module is installed in the DSP slot of the 3630 and is mutually exclusive with Tone or DDS modules (90-0512-01, 90-0160-01).

3630 R5.3 E1 100-240VAC SYSTEM Desktop, wall-mount, 19 rack-mount system. Provides two E-1(2.048 Mb/s) links. Includes internal power supply (100-240VAC) with integral ringing generator (factory set to 25Hz, user configurable to 20Hz), common control, Universal card, display assembly and software 91X5. Optional wall mount bracket (90-0338-04), and customer documentation (90-0433-03) to be ordered separately. If the optional slider (90-9084-01) is required , order 90-0411-67.

3630 R5.3 E1 100-240VAC SYSTEM W SLIDER Identical to 90-0411-57 but with sliders to allow access to a system by pulling the chassis outward from an equipment rack.