UDP ADAP (X.21 DTE) Single Port DB15, X.21 DTE Adaptor Module for use with Universal Distribution Panel (90-1615-01).

UDP ADAP RS449/V.36DCE Single Port DB37, RS449/V.36 DCE Adaptor Module for use with Universal Distribution Panel (90-1615-01).

UDP ADAP RS449/V.36DCE Single Port DB37, RS449/V.36 DCE Adaptor Module for use with Universal Distribution Panel (90-1615-01).

UDP ADAP RS449/V.36DTE Single Port DB37 RS449/V.36 DTE Adaptor Module for use with Universal Distribution Panel (90-1615-01).

UHP Ant 6.4/7.1Ghz DP 4ft PDR70

UHP MW Ant 10ft/5.925-6.425GHz D. Pol

UHP MW Antenna 8ft/4.4-5GHz Dual Pol

UHP_ANT_6.75GHZ*1.8M*DP

UNIVERSAL AC P.SUPPLY clei A single 150 watt AC power supply that auto ranges to cover both 100/120 VAC and 220/240 VAC. The supply allows hot swapping and load sharing. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

UNIVERSAL CLAMP

UNIVERSAL DIST PANEL 19 inch rack mountable assembly which provides backplane access to four circuits from the RS-422 DCC (90-1549-01) via four adaptor modules (90-1642-01/02/03/04/05/06/07/08). Each module position can be independently provisioned with a different interface module to correspond to the type of interface each RS-422 DCC port has been configured as (ie. RS-530, RS-449/V.36, X.21 or V.35). Included are two 25 pair cables required to connect the distribution panel to the system.

UNIVERSAL DIST PANEL 19 inch rack mountable assembly which provides backplane access to four circuits from the RS-422 DCC (90-1549-01) via four adaptor modules (90-1642-01/02/03/04/05/06/07/08). Each module position can be independently provisioned with a different interface module to correspond to the type of interface each RS-422 DCC port has been configured as (ie. RS-530, RS-449/V.36, X.21 or V.35). Included are two 25 pair cables required to connect the distribution panel to the system.

UNIVERSAL DIST PNL EMC This assembly which is tailored for EMC Class B applications is a 19 inch rack mountable assembly which provides backplane access to four circuits from the RS-422 DCC (90-1549-01) via four adaptor modules (90-1642-01/02/03/05/06/07/08). Each module position can be independently provisioned with a different interface module to correspond to the type of interface each RS-422 DCC port has been c onfigured as (ie. RS-530, RS-449/V.36, X.21 or V.35). Included are two 25 pair cables required to connect the distribution panel to the system.

UNIVERSAL DIST PNL EMC This assembly which is tailored for EMC Class B applications is a 19 inch rack mountable assembly which provides backplane access to four circuits from the RS-422 DCC (90-1549-01) via four adaptor modules (90-1642-01/02/03/05/06/07/08). Each module position can be independently provisioned with a different interface module to correspond to the type of interface each RS-422 DCC port has been c onfigured as (ie. RS-530, RS-449/V.36, X.21 or V.35). Included are two 25 pair cables required to connect the distribution panel to the system.

UPG KIT INTEG. TO INTEG. W/SPOOLING This kit is used to upgrade a Release 4.2 or R4.3 Integrated CallP or Integrated CallP/PNNI card to an Integrated CallP/PNNI/Spooling card in Release 5.0. Factory shipments of R5.0 Integrated CallP/PNNI/Spooling cards ship with the ePM Installed, as well as with a larger (256M) SanDisk and SRAM included,and do not require this upgrade kit. The kit contains an ePM (333MHz PowerPC 755 module with 512M RAM), 256M SanDisk, 6M SRAM, part number labels and instructions for

UPG KIT INTEG/EPM TO INTEG. W/SPOOLING This kit is used to upgrade a 7470 Release 4.3-5.0 Integrated CallP or Integrated CallP/PNNI card, or 7270 Release 5.0 control card to an Integrated CallP/PNNI/Spooling card in Release 5.0. Also it is to be used to upgrade a R2.0 7670 ESE ECC (90-8396-01) to support integrated data spooling.Factory shipments of R5.0 Integrated CallP/PNNI/Spooling cards ship with the SRAM included and do not require this upgrade kit. The kit contains a 6M SRAM card, part number labels and instructions for installation. Note for the 7470 that if the card to be upgraded does not use the ePM and larger (256M) SanDisk, then the Integrated CallP or Integrated CallP/PNNI Upgrade to Integrated CallP/PNNI/Data Spooling Kit(90-8977-01) should be used instead. Note for the 7270 that if the card to be upgraded does not use the ePM and larger (96M) SanDisk, then both the 7270 control card upgrade kit (90-4452-13) and this upgrade kit are required..

UPG KIT INTEG/EPM TO INTEG. W/SPOOLING This kit is used to upgrade a 7470 Release 4.3-5.0 Integrated CallP or Integrated CallP/PNNI card, or 7270 Release 5.0 control card to an Integrated CallP/PNNI/Spooling card in Release 5.0. Also it is to be used to upgrade a R2.0 7670 ESE ECC (90-8396-01) to support integrated data spooling.Factory shipments of R5.0 Integrated CallP/PNNI/Spooling cards ship with the SRAM included and do not require this upgrade kit. The kit contains a 6M SRAM card, part number labels and instructions for installation. Note for the 7470 that if the card to be upgraded does not use the ePM and larger (256M) SanDisk, then the Integrated CallP or Integrated CallP/PNNI Upgrade to Integrated CallP/PNNI/Data Spooling Kit(90-8977-01) should be used instead. Note for the 7270 that if the card to be upgraded does not use the ePM and larger (96M) SanDisk, then both the 7270 control card upgrade kit (90-4452-13) and this upgrade kit are required..

USC/NMS Cable L=15m

USER GUIDE FAST CONFIGURATION TOOL R1.0 FOR ISA-ATM

USER GUIDE FAST CONFIGURATION TOOL R1.0 FOR ISA-ATM