OPTICAL EXT XCVR - ORANGE This SFP module is installed on the Dual 2Mb/s Optical Interface Card (90-9784-01). This module uses multi rate module transmitting at 1310 nm and receiving at 1550 nm and uses an LC type connector. A Blue Xcvr module (90-9791-02) is required at the far end to terminate the link.

PE S/W DOWNLOAD KEY P611 36120 PE Release 1.2 Software Download Key.

PRI RJ45 DIST PANEL ISDN Primary Rate Distribution Panel

PWR SUPPLY 100-240VAC 3600 Mainstreet AC Power Supply (87 to 264VAC). This part provides AC power for the 3600 Mainstreet system and requires a power tray (90-3669-11 single feed, or 90-3669-12 dual feed) to connect to the system. The power supply can be used in pairs in load sharing mode to provide redundant power. This power supply is designed to replace (90-2378-01).

PWR SUPPLY 48/60VDC 3600 Mainstreet DC Power Supply (-48 TO 60VDC). This part provides DC power for the 3600 Mainstreet system and requires a power tray (90-3669-03) to connect to the system. The power supply can be used in pairs in load sharing mode to provide redundant power. This power supply is designed to replace (90-2378-02).

PWR TRAY -48/60VDC clei DC dual input power shelf with front panel indicators displaying power supply status and alarms. Does not contain a power supply. Can accomodate one or two PWR SUPPLY -48/60VDC (90-9524-02) or one power supply and one Mainstreet RINGER PSU (90-5946-01). Power Tray includes NA power cord. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

PWR TRAY CABLE KIT 3600 MSS This cable kit will allows power trays 90-3669-11, 90-3669-12, and 90-3669-03 to be installed into MainStreet 3600 MSS shelf 90-0662-03 and MainStreet 3600 MSS shelf 90-0652-01.

PWR TRAY CABLE KIT 3600 This cable kit will allows power trays 90-3669-11, 90-3669-12, and 90-3669-03 to be installed into an existing MainStreet 3600 shelf (90-0010-10)

PWR TRAY DUAL FEED AC clei 87 to 264 VAC dual input power shelf with front panel indicators displaying power supply status and alarms. Does not contain a power supply. Can accomodate one or two 87/264 VAC power supplies (90-9524-01) or one power supply and one Mainstreet RINGER PSU (90-5946-01). this part replaces 90-3669-02 and 90-3669-06. Power Tray includes NA power cord and EU (pig tail) power cord.

PWR TRAY SINGLE FEED AC clei 87 to 264 VAC single input power shelf with front panel indicators displaying power supply status and alarms. Does not contain a power supply. Can accomodate one or two 87/264 VAC power supplies(90-9524-01) or one power supply and one Mainstreet RINGER PSU(90-5946-01). This part replaces 90-3669-01 and 90-3669-05. Power Tray includes NA power cord and EU(pig tail) power cord.

REDUND SW SHELF CBL EMC Identical to 90-0697-01-01 but tailored for EMC Class B applications.

REDUND SW SHELF CBL This cable assembly is required when configuring redundant Switching Shelves. Included is one cable assembly (4 ft).

RS-422 DCC BUFFER MODULE Optional module for use with RS422 DCC (4CCT) P/N 90-1549-01. Provides programmable slip buffers operating on a per port basis.

RS232 DIST PANEL (EU-TC AND OTHER) Mainstreet RS232 Distribution panel comes complete with shielded AMP Champ cable, for installation in other environments including Telecom Centres.

RS232 DIST PANEL 19 inch rack mountable assembly which provides backplane access to six RS-232 circuits via six DB-25 connectors. Included are two 25 pair cables required to connect the distribution panel to the system.

RS232 SYNC/ASYNC DCC(6) This card consists of 6 individual RS232/CCITT V.24 compatible interfaces. Three of the interfaces are available from the backplane with the remaining three available at the front panel 25 pair connector (AMP CHAMP).

RS422 DCC (4 CCT) This assembly consists of four RS-422/CCITT V.11 interfaces, each independently programmable for V.35, X.21, V.36, RS-449 or RS-530. Individual circuit clocking for data rates of 1200 b/s to 1920 kb/s is provided by this assembly. This part is supported by Generic 1115 or greater.

S/W D/L KEY DSP5 & VOFR Software key that allows existing DSP5 or DSP5 VoFR hardware to be upgraded to the latest HCV, LD-Celp, A-Celp A, A-Celp, and VoFR A-Celp A loads contained on the 90-6339-01 and 90-6339-02 DSP5 VoFR, and 90-0038-17 and 90-0038-19 DSP5 cards. This upgrade will allow both the TDM and VoFR voice compression algorithums to co-exist on the DSP5.

S/W DOWNLOAD KEY 1118.0 3600 Release 8.0 S/W Download Key.

S/W DOWNLOAD KEY 1119.0 3600 Release 9.0 S/W Download Key.