FXS (LGS) (12) 600C (4-3/1-6)U This card consists of 12 individual Loop Start, Ground Start or Private Line Automatic Ringdown (PLAR) circuits designed to interface with PBX trunk ccts or standard telephones. FXS, DPO, and MFO signaling is supported. Transmit gain range is 4 to -3 dBm and receive gain range is 1 to -6 dBm. Provides for Mu Law voice companding. Designed for the North American market requirements.

FXS (LGS) (12) ZCO (4-3/1-6)A This card consists of 12 individual Loop Start, Ground Start or Private Line Automatic Ringdown (PLAR) circuits designed to interface with PBX trunk ccts or standard telephones. FXS, DPO, and MFO signalling is supported. Provides A law companding on all circuits for the UK and international m arkets. Transmit gain range is 4 to -3 dBm and receive gain range is 1 to -6 dBm.

FXS (LGS) (6) 900C (0-7/0-7)U This card consists of 6 individual Loop Start, Ground Start or Private Line Automatic Ringdown (PLAR) circuits designed to interface with PBX trunk ccts or standard telephones. FXS, DPO, and MFO signaling is supported. Provides Mu-law companding on all circuits for the North American market. Allows for transmit and receive gain ranges of 0 to -7 dBm. The input impedance presented is 900 ohms + 2.16uF. BC-Tel special design.

FXS (LGS) CHANNEL UNIT-2 clei The LGS Channel Unit provides an interface of 600 or 900 ohms to the 3600/45 system and the station end of 2-wire special service circuits. Provides FXS, DPO and GT functionality. Attenuation range in 0.1 dB steps. TX TLP levels of 0 to -12 dB and RX TLP levels of +6 to -10 d_B. Requires 3600 equipped with common carrier card (90-1234-01). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

GFC-2 (UK) This General Facilities card allows for order wire access, diagnostics, and alarming. Order wire facility offers A-Law companding, and alarming facility is according to BT TEP-1E. Offers a reduced width faceplate with card extraction levers.

GFC-2 MULAW AM-2 Identical to 90-0078-04, but with enhanced alarm I/O capabilities (Alarm Module 2).

GFC-2 NA clei This General Facilities card supports the same functionality as 90-0078-03 but offers a reduced width faceplate with card extraction levers. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

GFC-3 AM-2 clei The GFC3 provides a wide range of maintenance functions. Typical GFC3 applications include monitoring quality of digital data links, and troubleshooting of data or voice circuits and cabling problems. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

GFC-3 TEP-1 (E) The GFC3 provides a wide range of maintenance functions. Typical GFC3 applications include monitoring quality of digital data links, and troubleshooting of data or voice circuits and cabling problems.

GFC-3 TEP-1 (ROHS COMPLIANT) RoHS compliant version for EU applications. Same as 90-3085-02 but with the removal of all voice-related functions. Details in Rel 9 technical practices. No system software changes required.

GSLC-12 TDM SHDSL LINE CARD The GSLC-12 is a 12 Port G.SHDSL Line Card designed to be installed in the 3600 Mainstreet Product Line. The line card can connect to a 3RD party G.SHDSL compliant NTU.

HI SPEED PERIPH SHELF-2 This shelf consists of a card cage and backplane and accommodates up to eight E-3 Cards (90-1224-xx or 90-9751-xx). Uses up to two 90-0899-04 DC power supplies. Includes EMC front cover. Meets EMC class B requirements when EMC front cover is installed correctly.

HSPS-2 DC PWR SUPPLY DC plug-in power supply for High Speed Peripheral Shelf-2 (90-0652-02). Two power supplies can be installed for redundancy or load sharing.

HSPS-2 FILLER PLATES This package contains eight full height and eight half height slot-filler plates for the 3600 High Speed Peripheral Shelf-2 (90-0652-02). These are used to maintain cooling requirements for partially filled High Speed Peripheral Shelf-2's.

ISDN S/T BRI CARD 4CCT This card provides four Basic Rate Interface BRI interfaces for use at either the S or T reference points. This card is supported by Generic 1116 or greater.

LINE CARD DISTRIBUTION PANEL CABLE This cable is used to connect 27LC2, 27LC3, 28LC, GSLC-12, and GSLC-16 to the Line Card Distribution Panel (90-9634-01). One cable per line card is required.

MAINSTREET S/W MAINTENANCE UNIT This 90- level part number is used in conjunction with S/W maintenance contracts to calculate and order s/w for the nodes within a network over the period of the contract.

MULTIPORT AGG (4 CCT) clei Identical to 90-1610-01, but tailored for Class A Operation. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

OCU-DP CHANNEL UNIT-2 clei The OCU-DP Channel Unit provides an interface to the 3600/3645 system and 4 wire special service data circuits. DDSI/II compatible. Error correction and secondary channel. Data rates of 2.4, 4.8, 9.6, 19.2 and 56 kb/s. Min 40dB insertion loss. Requires 3600 equipped with Common Carrier card (90-1234-01). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

OPTICAL EXT XCVR - BLUE This SFP module is installed on the Dual 2Mb/s Optical Interface Card (90-9784-01). This module uses multi rate module transmitting at 1550 nm and receiving at 1310 nm and uses an LC type connector. An Orange Xcvr module (90-9791-01) is required at the far end to terminate the link.