DS3 CCE-2 3/1/0 3-PORT CE (NO MAU) clei The DS3 CCE-2 3/1/0 Circuit Emulation card performs the necessary operations to allow the transport of individual DSos, N*64k groups of DS0s, DS1s, or full DS3 circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM forum. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-02 for deployment in 7670 ESE shelf.

DS3 CCE-2 3/1/0 3-PORT CE (NO MAU) clei The DS3 CCE-2 3/1/0 Circuit Emulation card performs the necessary operations to allow the transport of individual DSos, N*64k groups of DS0s, DS1s, or full DS3 circuits through an ATM network. This card supports both structured and unstructured service as defined by the ATM forum. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-02 for deployment in 7670 ESE shelf.

DS3 CFR clei The DS3 Channelized Frame Relay Card provides a single standard s-compliant DS3 interface to the 7470 system. This interface ter minates 256 frame relay streams and will perform standards-bas ed frame switching network-interworking or service-interwork ing. This card requires Release 4.2 for operational support and is delivered with R4.2 application software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DS3 CFR clei The DS3 Channelized Frame Relay Card provides a single standard s-compliant DS3 interface to the 7470 system. This interface ter minates 256 frame relay streams and will perform standards-bas ed frame switching network-interworking or service-interwork ing.

DS3 UFR clei The DS3 Unchannelized Frame Relay Card provides a single standa rds-compliant DS3 interface to the 7470 system. This interface t erminates one unchannelized frame relay stream and will perfor m standards-based frame switching network-interworking or se rvice-interworking. This card is deliver ed with R4.2 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DS3 UFR clei The DS3 Unchannelized Frame Relay Card provides a single standa rds-compliant DS3 interface to the 7470 system. This interface t erminates one unchannelized frame relay stream and will perfor m standards-based frame switching network-interworking or se rvice-interworking.

DS3 UFR clei The DS3 Unchannelized Frame Relay Card provides a single standards-compliant DS3 interface to the 7470 or 7670 ESE system. This interface terminates one unchannelized frame relay stream and will perfor m standards-based frame switching network-interworking or service-interworking. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label. In the 7470, the card requires MAU 90-4919-01. In the 7670 ESE, adapter card 90-7307-02 and MAU 90-7308-01 are necessary.

DS3-2 ATM UNI/NNI W/CPU-2 (13.5K) clei DS3-2 ATM Card w/CPU-2 is a triple port card. Each port is both a UNI and NNI DS3 ATM interface operating at 45Mbps. Each interface has dual coax BNC connectors with a range of 450 feet. The DS3-2 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1). This DS3 card provides 4.5K connections per port, larger buffers, more service categories, substantially higher call processing capabilities and a Traffic Shaping Module position for support of the optional enhanced traffic management features. The Multi-Service Traffic Shaping Module (MTSM) can be ordered as 90-4724-01. The enhanced Traffic Management (eTM) module can be ordered as 90-7695-01. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-02 for deployment in 7670 ESE shelf. The 90-2322-01 and 90-7308-02 MAUs are not shipped with the DS3-2 card and each must be ordered separately.

DS3-2 ATM UNI/NNI W/CPU-2 (NO MAU) clei The R5.0 DS3-2 ATM Card w/CPU-2 is a triple port card. Each port is both a UNI and NNI DS3 ATM interface operating at 45Mbps. Each interface has dual coax BNC connectors with a range of 450 feet. The DS3-2 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1). This DS3 card provides 4.5K connections per port, larger buffers, more service categories, substantially higher call processing capabilities and a Traffic Shaping Module position for support of the optional enhanced traffic management features. The Multi-Service Traffic Shaping Module (MTSM) can be ordered as 90-4724-01. The enhanced Traffic Management (eTM) module can be ordered as 90-7695-01. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-01 for deployment in 7670 ESE shelf. The 90-2322-01 and 90-7308-01 MAUs are not shipped with the DS3-2 card and each must be ordered separately. The R5.0 DS3-2 card can be used in a R2.0 7670 ESE node.

DS3-2 ATM UNI/NNI W/CPU-2 CLEI This card may be used in 7470 MSP R6.0 - R9.1 or 7670 ESE R2.2 - R5.X systems.The DS3-2 ATM Card w/CPU-2 is a triple port card. Each port is either a UNI or NNI operating at 45Mbps. Each interface has dual coax BNC connectors with a range of 450 feet. The DS3-2 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1). This DS3-2 card provides 4.5K connections per port, larger buffers, more service categories, substantially higher call processing capabilities and a Traffic Shaping Module position for support of the optional enhanced traffic management features. The Multi-Service Traffic Shaping Module (MTSM), 90-4724-01, is *NOT* supported on this card. The enhanced Traffic Management (eTM) module is supported and can be ordered as 90-7695-01. This card requires MAU 90-2322-02 for deployment in 7470 PS-2 shelf or MAU 90-7308-01 (DS3) for deployment in the 7670 ESE shelf. The 90-2322-01 and 90-7308-01 MAUs are not shipped with the DS3-2 card and each must be ordered separately. The DS3-2 card can be used in a 7670 ESE node with the appropriate adaptor card. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DS3-2 ATM UNI/NNI W/CPU-2 R4.3 clei The R4.3 DS3-2 ATM Card w/CPU-2 is a triple port card. Each port is both a UNI and NNI DS3 ATM interface operating at 45Mbps. Each interface has dual coax BNC connectors with a range of 450 feet. The DS3-2 card is fully compliant to the mandatory requirements of the ATM Forum UNI specification (version 3.1) and the ATM Forum B-ICI specification (version 2.0). The DS3-2 differs from the DS3 card (90-2189-xx) in that it provides larger buffers, more service categories, substantially higher call processing capabilties and a Multi-Service Traffic Shaping Module position for support of the optional enhanced traffic management features a BNC MAU (90-2322-02) is included for physical connection via coaxial cable. The Multi-Service Traffic Shaping Module (MTSM) can be ordered as 90-4724-01. The enchanced Traffic Management (eTM) module can be ordered as 90-7695-01.

DS3/E3 coax 10-foot 1.0/2.3 to female BNC patch cable

DS3/E3 coax 10-foot 1.0/2.3 to female BNC patch cable

DS3/E3 SPARING PANEL clei DS3/E3 SPARING/PROTECTION PANEL. This protection panel is used in conjunction with the 90-4919-01 DS3/E3 switching MAU in 1:N applications that use single port DS3 or single port E3 cards. A cable is available per 90-4920-01. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DS3/E3 SPARING PANEL clei This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DS3/E3 SWITCHING MAU clei The DS3/E3 Switching MAU provides two pairs of coaxial connectors for all single port DS3 or E3 interface cards. One pair connects to the Tx and Rx of the primary card and the other is used to route to a sparing card via the sparing control panel (90-4918-01). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DS3/E3 SWITCHING MAU clei The DS3/E3 Switching MAU provides two pairs of coaxial connectors for all single port DS3 or E3 interface cards. One pair connects to the Tx and Rx of the primary card and the other is used to route to a sparing card via the sparing control panel (90-4918-01). This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DSC-1310/NSX clei The Dual Switching Card is a scalable cell switching fabric card which can terminate the transmit interface of up to two 800 Mbps ISL links. The associated Dual Receiver Card terminates the ISL link received interface. One to eight Dual Switching Cards can be installed in the Switching Shelf Cardfile to create cell fabrics of 1.6 Gbps to 12.8 Gbps.

DSC-1310/NSX clei The Dual Switching Card is a scalable cell switching fabric card which can terminate the transmit interface of up to two 800 Mbps ISL links. The associated Dual Receiver Card terminates the ISL link received interface. One to eight Dual Switching Cards can be installed in the Switching Shelf Cardfile to create cell fabrics of 1.6 Gbps to 12.8 Gbps. This card is delivered with R4.2 software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

DSC-1310/NSX clei The Dual Switching Card is a scalable cell switching fabric card which can terminate the transmit interface of up to two 800 Mbps ISL links. The associated Dual Receiver Card terminates the ISL link received interface. One to eight Dual Switching Cards can be installed in the Switching Shelf Cardfile to create cell fabrics of 1.6 Gbps to 12.8 Gbps.