S/W DOWNLOAD KEY 1117.1 3600 Release 7.1 S/W Download Key.

S/W DOWNLOAD KEY 1118.0 3600 Release 8.0 S/W Download Key.

S/W DOWNLOAD KEY 27LC3 REL 2 Software download for Rel 2.0 of the 27LC-3 card.

S/W DOWNLOAD KEY C117.1 3600 Switching Unit Release 7.1 S/W Download Key.

S/W DOWNLOAD KEY C118.0 3600 Switching Shelf Release 8.0 S/W Download Key.

S/W DOWNLOAD KEY D117.1 3600 Multi Shelf System Peripheral unit Release 7.1 S/W Download Key.

S/W DOWNLOAD KEY D118.0 3600 3600 Multi Shelf System Peripheral Shelf Unit Release 8.0 S/W Download Key.

S/W DOWNLOAD KEY DSP5 Software key used for maintenance load upgrades that allow existing DSP5 hardware to be upgraded to the latest HCV, LD-Celp, A-Celp A, and A-Celp loads contained on the 90-0038-17 and 90-0038-19 DSP5 cards.

S/W DOWNLOAD KEY DSP5 VOFR Software key used for maintenance load upgrades that allow existing DSP5 VoFR hardware to be upgraded to the latest VoFR A-Celp A load contained on the 90-6339-01 and 90-6339-02 DSP5 VoFR cards.

S/W DOWNLOAD KEY E117.1 3600 E-3 Interface Release 7.1 S/W Download Key.

S/W DOWNLOAD KEY E118.0 3600 E-3 Interface Release 8.0 S/W Download Key.

S/W DOWNLOAD KEY H117.1 3600 DS-3 Interface Release 7.1 S/W Download Key.

S/W DOWNLOAD KEY H118.0 3600 DS-3 Interface Release 8.0 S/W Download Key.

Serial Port Interchange (SPI) Card

SERVICE CARD-2 UPGRADE KIT This kit is used to upgrade an R4.3/5.0 Service Card-2 (CallP, PNNI or Data Spooling card) to the enhanced Processor Module (ePM). Factory shipments of R4.3 Service Card-2 and higher cards ship with the ePM installed and do not require this upgrade kit. The kit contains an ePM (333 MHz PowerPC 755 module with 512M RAM), part number labels and instructions for installation.

SGL MODE SC-SC FIBER - 4P 0C3/STM1 IR-LR This cable is used to connect the quad OC3/STM1 IR/LR CR optical card to a patch panel at the rear of the cabinet.

SGL MODE SC-SC FIBER - 4P 0C3/STM1 IR-LR This cable is used to connect the quad OC3/STM1 MMF optical CR card to a patch panel at the rear of the cabinet.

SHUB-2 clei The Single Shelf Hub Card-2 is the common equipment card for the peripheral Shelf Card File which has local switching capability, supporting the advanced traffic management capabilities introduced in Release 3.1. This card configures the Peripheral Shelf to be a 1.6 Gb Stand alone switch. Two Single Shelf Hub Card-2's are required per peripheral shelf (for fabric redundancy) in multi-shelf system. This card is delivered with R4.2 application software. This assembly contains a Telcordia CLEI (Common Language Equipment Identifier) label.

SHUB-2 clei The Single Shelf Hub Card-2 is the common equipment card for the peripheral Shelf Card File which has local switching capability, supporting the advanced traffic management capabilities introduced in Release 3.1. This card configures the Peripheral Shelf to be a 1.6 Gb Stand alone switch. Two Single Shelf Hub Card-2's are required per peripheral shelf (for fabric redundancy) in multi-shelf system.

SINGLE E1 RED Y-CBL EMC This cable is for use with the 3600+ Octal E1(90-3542-0x) The cable is used to connect two E1 ports in a redundant configuration.